Th691000-10 Wide Range Programmable Dc Power Supply 3kw

TH691000-10 wide range programmable DC power supply

Rated output: 1000V/10A (3000W)
The output range is 3 times that of the same power "rectangular" power supply
High-frequency LLC multi-resonance inverter, the overall efficiency is as high as 93%
Active PFC, power factor up to 0.99
High resolution, high precision; low ripple, low noise
a 2ms fast transient response
The rising and falling edge speeds of the output are adjustable
Power supply constant voltage (CV), constant current (CC), constant power (CP) modes
Master-slave mode supports parallel connection, active current sharing, and up to 10 units of the same type of products can be connected in parallel.
OVP, OCP, OPP, OTP, input under-voltage protection, SENSE terminal reverse connection protection
Built-in function generator
Equipped with discharge circuit (Uout<10V within 1s)
Individual control of power output through external analog interface
High-brightness color LCD display
Flexible and powerful sequence testing function
Support SCPI command language
Interface: RS232, USB HOST, Optional (RS485, CAN, GPIB, LAN, analog control interface)

The TH6900 series is a programmable switching DC power supply with a wide range of output, with 21 models available in three powers: 750W, 1500W and 3000W. The instrument supports up to 10 master-slave parallel connections of the same model to meet higher output current and output power requirements.

The TH6900 series supports the sequence test function, allowing users to set a series of voltage, current, and power, and automatically output according to the set rules, which better meets users' applications such as automatic testing and aging testing. The instrument can store 50 sequences, each sequence contains 20 steps, and the function of each step can be set independently. There are 12 independent functions, including loop control, slope mode output and other rich control functions.

This instrument can output sine waves, rectangular waves, triangle waves, trapezoidal waves, etc. based on the set voltage, current and other parameters. Based on these waveforms, users can form a sequence output. The sequence can be set up to ten steps, and each step can be set to any A waveform and the duration of the waveform to facilitate users to test products. In addition, the TH6900 power supply has a solar cell array simulation function. In addition to realizing CC, CV, EN50530 and other mode outputs through the host computer software, the stand-alone machine also has a built-in model for simulating the solar cell array output curve.

This series of power supplies also has adjustable rising and falling edge speeds. Various modes (source CV, CC, CP) support setting the rise and fall time, and the setting range is 0.01S~999.99S.

Features
A. Convenient panel operation
This series of products adopts a 2U standard chassis, which is suitable for workbench operation and can be easily built into an industrial standard cabinet. It is equipped with a high-brightness 4.0-inch color LCD display, comfortable silicone buttons, easy-to-operate convenient knobs, and has 4 Intuitive LED status indicator.
B. Rich built-in interfaces
C. DC output

This series of power supplies includes three basic models: 750W, 1.5kW and 3kW. The output voltage ranges from 0~40V to 0~1000V, and the output current ranges from 0~2.5A to 0~120A, corresponding to various different models. Regardless of manual or remote control (analog or digital), voltage, current and power can be continuously adjusted from 0% to 100%.
D. Parallel function
All products come standard with a digital master-slave bus. Through it, up to 10 products of the same model can be connected in parallel to aggregate the actual voltage, current and power to form a larger system. This operation can complete the entire configuration of the master-slave system through the control panel on the product.