Seawater Submersible Pump

Seawater Submersible Pump for seawater is suitable for offshore platform fire-fighting thermal dissipation seawater desalinization seawater lifting coastal square fountain mariculture and attemperation as ground source heat pump in coastal area.
Technical parameter:
Max. outer diameter: 234mm; Outlet diameter: DN125
Outlet connection parameter: 8 threaded studs M14A 60 bolts center distance:180mm.
In order to install easily we particularly have equipped with a matching flange (outer diameter:178mm inter diameter:DN125 and thickness:16mm) consistent to the outlet.
Medium Range:

1 All kinds of seawater alkaline corrosive water clean water cold water rainwater gushing water of mining drinking water etc.
2 Water temperature range: +5a --+25a
3 Solid content (mass ratio): a 0.01%
4 PH: 7.9-8.6
5 Full set should be submerged in water.

Motor Parameter:

The submersible motor is lubricated by clean water. It must be filled with clean water or its service life will be lessen. If you forget filling the motor will be broken.
Motor protection level: IPX8
Power Source:
Voltage: 380v frequency: 50Hz or Voltage:660v frequency:50Hz
If you need special voltage or frequency please inform us in advance.
Materials:
Impeller: tin bronze such as ZCuSn3Zn8Pb6Ni1
Pump bowl: tin bronze such as ZCuSn3Zn8Pb6Ni1
Pump shaft: stainless steel 316L. Filter :316L. Bolt:316 Flange:316
End bell (upper and lower): 316 Middle part:316