Gold Purlin Roof Structure

Heat Shield HS 7201-6 is a fire retardant, double sided reflective aluminium foil laminate, with most superior anti tear and puncture resistant properties & 97% heat reflectivity. Features & Benefits Tear proof 8. high puncture resistant construction using HDPE weave as reinforcement ensures maximum durability.97% heat reflectivity ensures best insulation a lower air conditioning costs.High light reflectance enables reduction in lighting costs.Excellent vapour] moisture barrier as manufactured with pure polished aluminium foil and PE weave reinforcementProvides better working living environment in non a/c buildings 8. very hygienic as no fiberglass used.Very easy and economic to install - no tear during a alter installation as no Kraft paper used.Washable. foldable & retractable due to unique construction Application Roof under deck a. wall Insulation . andInsulation cum water resistant under sheathing tor tiled rootsFacing tor bulk Insulation blanketsRetractable curtains to shield against heat. water, moisture. wind. dust etcVapour barrier for walls. metal deck roofing, flooring & air conditioning ductsWrapping o! pipes and vessels to prevent heat lossPartition screens from internal high emissive areas in factories! Buildings Installation : HS 7201-6 tear resistant 8- tire retardant radiant heat barrier can be used for both real 8. wall insulation.Roofing sheet: lay aver purlings by unrolling toil down the length from the ridge of the root truss, a join overlap of 50 mm is recommended.Old roofs: Fix under porting using adequate support to hold the foil in Only minimal support is necessary as it is anti-tear and sell supports longer spans.Concrete roofs: Either above false ceiling or from a light framework on the ceiling bottom providing the requisite air-gap & install fail on to the framework either by fastening [sticking or both. For pitched concrete roofs with tile paving, the fail can be laid in between the tiles and the concrete along the preformed batons (wood / motor).Tiled roofs: lay under tile batons commencing from the eaves. provide sufficient overlaps. All overlaps and penetrations ii any have to be sealed all using HSM9 reinforced loll tape. Instructions are freely available with our authorized dealers. Also Available In Different Constructions HSO-7101-6: Polyester Film/LDPE/Foil/LDPE/PE Weave(5 Layers)HS-7101 -6W: Fail/(OPE/PE Weave /White LDPE Lamination (4 Layers)HS-71016 : Foil/ LDPE / PE Weave (3 Layers]HSO-7101 -6W : Polyester film/LDPE/Fail/LDPE/PE Weave /White LDPE (5 layers) HS 7201-6 Material Composition Aluminium FoilPE laminatingPE Woven FabricPE Laminating Technical Specification : Property Value Test Method Weight 145 g/m2 + 5% In House Thickness 0.14mm + 5% In House Tensile strength MD 764 Kg/ cm2 ASTM D828 CD 514 Kg/cm2 ASTM D828 Elongation MD 45.0% ASTM D3759 CD 39.1% ASTM D3759 Burst Strength 19.1 Kg/cm2 ASTM D724 Reflectivity 0.97 ASTM E903 Emissivity 0.03 ASTM E408 Water Vapour Trans mission Rate 0.005 g/m2/ Day (solid) ASTM E96 Water Vapour Permeability <0.02 perms (Solid) 14 perms (perforated) ASTM E96 Temperature Range 60oC To + 100oC IN HOUSE Fire Rating Class 1 / Class A ASTM E84 Flame Spread Index 20 ASTM E84 Development Index 30 ASTM E84