Ptfe Molding Powder Medium Particle

Place of Origin: Shandong, China (Mainland)
Brand Name: Dongyue Juhua
Model Number: DF-101/102
Volume Density (g/l): 500A 100
Melting point, (a ): 3
Stand Relative Density: 2.130-2.160
Moisture Content(%)a : 0.04
Tensile Strength (MPa)a Y: 27
Elongation at Rupture %,a Y: 250
Average Grain, (um): 180A 80
Thermal Instability Index,a : 20
Electrical Strength,(KV/mm)a Y: 60
For process: Molding .

Specifications:
1.Supplied by Shandong Dongyue
2.Virgin PTFE powder for molding
3.PTFE powder for film sheet
4.Shandong PTFE medium powder

Usage: The resin can be processed to film, sheet, rob, gasket, bearing and presintered material

Packing,Storage,Transportation:
1.PTFE is packed in double layer PVC bags inside and in hard circular barrels outside .On the barrel, there should be attached label and quality certificate,on whichthere are brand ,trademark, executive criterion, type, grade, lot No. and net content, pack date, checker, packager
2.PTFE should be stored in clean dry warehouse to prevent from dust, moisture, etc, foreign matters.
3.The product are transported according to non-dangerous products. Heat, moisture, freezing and strong shock should be avoided during transportation. Over-bumpiness and compression is adapt to make the resin bind together.