Ppr Pipe & Fittings - Pp-r Material, 20-160mm Diameter | High Impact Resistance, Leak-proof Connections, Long Lifespan at Best Price in Ahmedabad

Ppr Pipe & Fittings - Pp-r Material, 20-160mm Diameter | High Impact Resistance, Leak-proof Connections, Long Lifespan

Price:

Get Latest Price

In Stock

Product Specifications

Material	PP-R
Color	Green
Dimensions	Varied
Pressure rating	Varied
Temperature range	-4°C to 95°C
Connection type	Fusion
Standards	ISO
Features	Durable, Corrosion-resistant, High flow rate, Easy installation, Long lifespan, Leak-proof, Eco-friendly, Chemical resistant, Cost effective, Temperature resistant

Product Overview

Key Features

PP-R Pipe & Fittings

PP-R Introduction

PPRa versatile, and comprehensive system for water and other fluid delivery, is used in applications of pressurized warm or cold water in all modern residential, commercial, and industrial application.

PP-R An Ideal Solution

PPR pipes and fittings are designed to withstand constant temperature up to 700 C. The service life expectancy depends on the installed system pressure and pressure changes. Even though the service life expectancy of the pipe is more than 50 years a permanent temperature rise from 700 C to 900 C will accordingly reduce the operational life of the pipe. However, a temperature rise up to 1000 C in short time frames is usually unproblematic.

Fusing tool

The pipe and fittings in type three PP-RC piping system are connected through thermal fuse plugging. The thermal fusing tools are applied to melt the inner & outer surfaces of the fitting and pipes simultaneously and plug connect them under the specified temperature and condition. The two pats are integrated uniformly and firmly when cooled. The connection provides good sealing, high reliability and avoids any leakage. See the table for fusing connection technical requirement.

Installation technical precaution

When temperature drops under 0C in winter, precaution must taken to prevent possible cracking of pipes if the pipes are hit by external force.
The pipe shall be away from heat when stored for long time, direct sunshine shall be avoided during product transportation or storage
PP-RC pipe has big away expansion coefficient, technical measures must be taken to prevent the thermal deformation of the pipes during the exposed or covered pipe layout.
One support or hanger (pipe buckle seat) must be installed every 400mm in exposed layout or non-liner covered layout.
During installation, relevant design & installation codes must be followed, the construction workers must be trained and carry their certification badges at work.

Fusing Connection Procedure

Pipe cutting off. The pipes must be vertically cut off with pipe cutter , the uneven edges must be trimmed after cut off.
A mark shall be made at the depth of pipe insertion (equal to slip in depth of adaptor)
Heat up the entire insertion part on welding tools, including pipes and fitting.
When the heating is over, insert the pipes into adaptor stably and evenly to from solid and perfect joint.

Why PP-R???

Exceptional corrosion & erosion resistance
High chemical resistance
Low Thermal Conductivity
Anti-Fungal & Non-toxic
Leak-proof & airtight homogenous joints
Negligible head loss, Minimum Pressure loss & Higher Flow Rate
Inherited characteristic of high impact strength
Wide Temperature range: -4C to 95C
Very low thermal loss
Trouble-free installation proceed & light in weight
Long Service life
Highly economical
Superior Impact, Fracture Resistance & Minimum Crack Transmission
PPR being an Eco-Friendly product does not catches fire straightforwardly, indeed in case of fire it doesnt produce toxic gases

Technical Data:-

Technical parameter for fusing connection

Pipe outer diameter(mm)	Fusing depth (mm)	Heating time (second)	Inserting time (second)	Cooling time (second)
20	14	5	4	2
25	15	7	4	2
32	1.65	8	6	4
40	18	12	6	4
50	20	18	6	4
63	24	24	8	6
75	26	30	10	8
90	32	40	10	8
110	38.5	50	15	10
160	56	80	20	15

Pipes and Fittings:-

MOC: PP/HDPE/PVDF/PPH

Other Fittings also available on request
All pipe fittings are As per IS Standards
Maximum working pressure 10kg/cm square
Also available Pipe fittings in Pressure PN 12, PN 12.5, PN 16 and PN 20 on request
Final technical & dimension detail confirm as & when required

FUSING TOOL

INTRODUCTION :-

The pipes and fittings in Type three PP-RC Piping systems are connected through thermal fuse plugging. the thermal fusing tools are applied to melt the inner & outer surfaces of the fitting and pipes simultaneously and plug connect them under the specified temperature and conditions. the two pats are integrated uniformly and firmly when cooled.The connection provides good sealing. high reliability and avoids any leakage. See the table for fusing connection technical requirement.

INSTALLATION TECHNICAL PRECAUTIONS

When temperature drops under 0 (zero) C in winter, precaution must take to prevent possible cracking of pipes if the pipes are hit by external force.
The pipe shall be away from heat when stored for long time, direct sunshine shall be Avoided during product transportation or storage.
PP-RC pipes has big expansion coefficient , technical measures must be taken to prevent the thermal deformation of the exposed or covered pipe layout.
One support or hanger ( pipe buckle seat ) must be installed every 400mm in exposed or non-linear covered layout.
During installation, relevant design & installation codes must be followed , the construction workers must be trained and carry their certification badges at work.

FUSING CONNECTION PROCEDURE

Pipe cutting off. The pipes must be vertically cut off with pipe cutter, the uneven edge must be trimmed after cut off.
A mark shall be made at the depth of pipe insertion (equals to slip-in depth of adaptor)
Heat up the entire insertion part on welding tools, including pipes and fitting.
When the heating is over , insert the pipe into adaptor stably and evenly to form a solid and perfect joint.

TECHNICAL PARAMETER FOR USING CONNECTION

Pipe outer diameter(mm)	Fusing depth (mm)	Heating time (second)	Inserting Time (Second)	Cooling time (Second)
20	14	5	4	2
25	15	7	4	2
32	16.5	8	6	4
40	18	12	6	4
50	20	18	6	4
63	24	24	8	6
75	26	30	10	8
90	32	40	10	8
110	38.5	50	15	10
160	56	80	20	15