Portable Drainage Submersible Pump Ms-mv Series

"VIRAJ" Make Portable Drainage Submersible Pump Design in single stage centrifugal closed couple vertical (mono-block type ) construction. This series are available with variable design of impeller like vortex, semi open, Chanel as per customer's requirement. And motor design in pressure resistance design with internal sealed, double mechanical shaft seal, as well as separate sealing chamber. The chamber is filled with oil. Motor sealing at the shaft double wear resistance mechanical shaft seal independent of direction on rotation entirely made of Tungsten or Silicon Carbide as close unit, Both seal cooled and lubricated by oil. The motor is equipped with two maintenance free ball bearing. The upper and lower bearing are filled with high quality grease. The motor is suitable for continuous operation (S-1) under full load in immersed and completely emerged condition.
TECHNICAL DATA
PRODUCT RANGE




 RANGE
 0.75 HP TO 5.0 HP ( UP TO 3.0 HP SINGLE PHASE)


 HEAD
 UP TO 30 MTR.


 DISCHARGE
 UP TO 84 M3/HR.


 SOLID SIZE
 MAX. UP TO 40 MM


 SPEED
 2900 RPM, 1440 RPM




MATERIAL OF CONSTRUCTION




 TOP COVER, BRG. HSG, OIL CHAMBER , BASE
 CAST IRON /MILD STEEL/ STAINLESS STEEL


 STATOR BODY
STAINLESS STEEL


 SHAFT
 STAINLESS STEEL 410 /431


 IMPELLER
 CAST IRON/STAINLESS STEEL/BRONZE


 MECHANICAL SEAL ( TWIN SEAL -TANDEM ASSEMBLY)
 T.C./T.C. OR SIC/SIC ( IST ) AND CABRON/S.S.( IIND)


 PAINT
PRIMER WITH EPOXY PAIN


 HARDWARE
 STAINLESS STEEL




APPLICATION




 * CONSTRUCTION SITE / HOTELS
 * TANK CLEANING


 * TRANCHES / RAIN WATER
 * FLOODED CLEAR WATER /RAW WATER


 * MINE RAW WATER LIFTING
 * OPEN SUMP /POND


 * POWER PLANT AND STEEL PLANT
 * CHEMICAL INDUSTRIES/ MUNICIPAL CORPORATION DRAINAGE WATER LIFTING