Poly Naphthalene Sulfonate Formaldehyde By Laizhou Guangsheng Chemical Building Materials Co., Ltd

Poly Naphthalene Sulfonate Formaldehyde is high range water-reducing and an anion surface active agent based on polyalkyaryl- sulphonate.It is also called sodium naphthelane (sulfonate) formaldehyde, or FDN, PNS. SNF.Technical Specfication:Solid Content 92% minMoisture 8.0 % maxFineness 5.0% maxPH value 7 - 9Chlorides Content 2.0% maxSurface Tension 68-72 Mn/mCement Flowing Rate 230mm minConcrete Reducing Water Rate 18% minSodium Sulfate Content 18% max (5%max is also available)Uses Poly Naphthalene Sulfonate Formaldehyde produces concrete with extremely workable characteristics referred to as high slump.PNS also allows concrete to be produced with very low water/cement ratios at low or normal slumps. Poly Naphthalene Sulfonate Formaldehyde is ideal for use in prestress, precast, bridge deck or any concrete where it is desired to keep the water/cement ratio to a minimum and still achieve the degree of workability necessary to provide easy placement and consolidation.Addition Rates Poly Naphthalene Sulfonate Formaldehyde can be added directly or added in after melt.It can be added during mixing and after-mixing.The afterward approach can achieve better result. The suggested addition rate is 0.75%.Poly Naphthalene Sulfonate Formaldehyde Direction Prepare solutions as required.Direct use of powdery agent is allowed.Alternatively the addition of the agent is followed by water moisturization (water-cement ratio: 60%).The agent can be combined with other externally applied agents if pilot development or laboratory experiment succeeds.