Multi Parameter Monitor By Unique Medicaids

Multi Parameter Monitor Features 7 Colour TFT LCD Screen with LED back lightArrhythmia indicationStandard configuration of ECG, SpO2 (NellcorTM) and NiBP (BP MAX)24 Hours Graphical and Tabular Trend24 Hours NiBP Trend with Alar conditionZoom option in graphical trendUser Selectable Colour SchemeAudible alert tonesSeparate visual alarm indicators for ECG, SpO2 & NiBPBuilt-in rechargeable battery Technical Specifications General Display 7 Colur TFT LCD with LED back light Resolution 800 x 4800 pixels Writing speed 25mm/sec Alarms Audio & Visual Freeze On demand Keyboard Flat Touch Membrane Operation Keys CNS Back panel connector 10 Pin FRC Connector (optional) Dimensions 235 x 174 x 140 mm Weight 2.5 Kgs (Approx) Power Supply AC-DC adapter 15V DC/1.5A AC mains variation 100 264 V AC Power consumption <22VA Battery Rechargeable NiMH 9.6V/1800mAh Battery backup duration 120 minutes (min) continuous with a fully charged battery SpO2 (NellcorTM) Patient safety Class 1 BF type applied part Amplifier Fully Isolated SpO2 range 0 - 100% Saturation Accuracy (%SpO2 + 1 SD) 70 100% + 2 digits 60 80% + 3 digits @ Low Perfusion 70 100% + 3 digits Low Alarm Limit Range 50 - 95% High Alarm Limit Range 55 - 100% Resolution 1% Pulse rate range 20 250 bpm Pulse rate accuracy 20 to 250 bpm + 3 digits @ Low Perfusion 20 to 250 bpm + 3 digits Plethysmograph Displayed on channel 2 Auto gained ECG Patient Safety Class 1 CF Defibrillator Protected Yes Leads User selectable I, II, III Heart Rate Range 30 250 bpm Heart Rate Accuracy +2 bpm or 2% whichever is higher Low alarm Limit Range 30 to 240 bpm High alarm Limit Range 40 to 250 bpm Bandwidth 0.5Hz to 35Hz User gain settings for 1mV 5mm, 10mm, 15mm, 20mm CMRR >90dB @ 50Hz Input impedance >2.5Mohms Leakage Current <10A Patient Isolation >4000 V AC @ 50Hz for 1 minute Reset Recovery Automatic return of waveform within 0.5 seconds after defibrillation or electrical overload ECG Display 6 seconds real time ECG on channel 1 Arrhythmia Detection Yes NiBP Method Automatic Oscillometric Parameters Systolic, Diastolic and Mean arterial pressure Operating Modes Manual, Automatic & Turbo / Stat Cycle Time in Auto mode 1, 2, 3, 4, 5, 10, 15, 30, 60, 90 minutes Operating time in Turbo mode 5 Minutes Blood Pressure Measure Range In mmHg Systolic 30 ~ 270 for Adult, 30 ~ 235 for Child and 30 ~ 135 for Neonate Diastolic 10 ~ 270 for Adult, 10 ~ 220 for Child and 10 ~ 110 for Neonate Mean 20~ 235 for Adult, 20 ~ 225 for Child and 20 ~ 125 for Neonate Typical determination Time (without artifact) 20 ~ 45 seconds Blood Pressure Accuracy Meets ANSI/AAMI SP10-2002, EN 1060-4 Cuff Inflation Time Maximum 20 seconds Air Leakage rate <2mmHg / minute Low Alarm Limit Range Systolic: 30 ~ 250 mmHg; Diastolic: 10 ~ 215 mmHg High Alarm Limit Range Systolic: 35 ~ 250 mmHg; Diastolic: 15 ~ 220 mmHg Environmental Temperature Operating 10 to 40oC; Transport and Storage: -20 to 60 oC Relative Humidity Operating: <85% non condensing;Transport and Storage: 10 to 90% non condensing Standard Accessories ECG Patient Cable with Clip : 1 No. SpO2 Cable with finger Probes : 1 No. Disposable Electrodes : 30 Nos. AC-DC Adapter : 1 No. Accessory Bag : 1 Nos. AC-DC Adapter : 1 No. Reusable NiBP Cutt (Adult, Paeditric, Infant) : 1 set each User Manual : 1 No.