Mtb Dg-jgp-p 64-1 Application Kit

Gripping force is the arithmetic sum of the individual force applied to each jaw at distance P (see illustration).

Finger length is measured from the reference surface as the distance P in direction to the main axis. The maximum permissible finger length applies until the nominal operating pressure is achieved. With higher pressures, the finger length must be reduced proportionally to the nominal operating pressure.

Repeat accuracy is defined as a distribution of the end Position for 100 consecutive strokes.

Workpiece weight is calculated for force-fit gripping with a coefficient of static friction of 0.1 and a safety factor of 2 against workpiece slippage at acceleration due to gravity g. For form-fit or capture gripping, there are significantly higher permissible workpiece weights.

Closing and opening times are movement times of the base jaws only, without application-specific gripper fingers, incl. valve switching times. PLC reaction times are not included in the above-mentioned times and must be taken into consideration when determining cycle times.

Housing material: Aluminum
Base jaw material: Steel
Actuation pneumatic, with filtered compressed air as per ISO 8573-1:2010 [3:4:3]

Warranty: 24 months