Mitsubishi Analog Input Module Fx3u-4ad-pt-adp Application: Industrial

Manufacturer : Mitsubishi Electric
Analog input adapter for Pt 100 type temperature sensor FX 3 U - 4 AD - PT - ADP
Temperature sensor . temperature control input signal : Platinum resistance temperature detector 3 wire type Pt 100 JIS C 1604 - 1997
Number of input channels : 4 channels
Rated temperature range : -50 A A C to + 250 A A C (-58 A A F to + 482 A A F)
Digital output : -500 to + 2500 (-580 to + 4820 ) Within parentheses, the digital value at Fahrenheit setting resolution : 0.1A C (0.18A F)
Overall accuracy : Ambient temperature 25A C A 5A C: A 0.5% with full scale Ambient temperature 0 A A C to 55A C: A 1.0% with full scale
control method : Depending on the sequence program
Conversion speed FX3U / FX3UC PLC : 200 (Data update every calculation cycle)
FX3S / FX3G / FX3GC Sequencer : 250 A A s (Data update every calculation cycle)
Insulation method : . Isolation between analog input part and sequencer by photo coupler . Insulation between analog input part and power supply by DC / DC converter . No isolation between each channel
Number of occupied I / O points : 0 point (It does not relate to the maximum input / output point number of the sequencer)
Application sequencer : FX3S, FX3G, FX3U, FX3GC, FX3UC (FX3UC - 32MT - LT is Ver.1.30 or later) FX3S - CNV - ADP is required for connection to FX3S. For connection to FX 3 G, FX 3 G - CNV - ADP is required. To connect to FX3U and FX3UC - 32MT - LT (-2), a function expansion board is required.
mass : 0.1 Kg
Power supply : DC 5 V 15 mA (internal power supply from the sequencer) DC 24 V + 20% -15% 50 mA (external power supply)
Ambient temperature : 0 to 55 A A C. ... Operating -25 to 75 A A C. ..... Save
Relative humidity : 5 to 95% RH (noncondensing).... in operation
Anti-vibration When DIN rail is installed Frequency: 10 to 57 Hz : One amplitude: 0.035 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 4.9 m / s 2 X, Y, Z 10 times in each direction (80 minutes in total)
Direct installation Frequency: 10 to 57 Hz : One amplitude: 0.075 mm X, Y, Z 10 times in each direction (80 minutes in total)
Frequency: 57 to 150 Hz : Acceleration: 9.8 m / s 2 10 times in X, Y, Z directions (80 minutes in total)
Impact resistance : 147 m / s 2 , working time 11 ms, three times in X, Y, Z directions with a sine half-wave pulse
Noise immunity : Noise voltage with 1,000 Vp-p, noise width 1 A A s, rising 1 ns, with noise sitor with period of 30 to 100 Hz
Withstand voltage : Between all terminals and ground terminal: 500 VAC for 1 minute
Insulation resistance : Between all terminals and ground terminal: 500 MV DC 500 MAC or more with an insulation resistance meter
ground : Class D grounding (grounding resistance: 100 A AC or less)Grounding should be dedicated ground or common ground.
Use atmosphere : There is no corrosive property, flammable gas, conductive dust (dust) is not serious
Use altitude : Can not be used in an environment pressurized to 2000 m or less under atmospheric pressure. It may break down.