Lumex Solar Street Lighting System

LUMEX SOLAR STREET LIGHTING SYSTEM

PRODUCT PROFILE: We are manufactures stand alone solar street lighting systems, meant for outdoor lighting applications. The system consist of a solar photovoltaic module, which absorbs sunrays and converts them into electricity, the electricity is then stored in battery. The control electronics which automates the functions of the system, acts as a photocell, turning the light on at dusk and off at dawn, regulates the battery preventing overcharging and protecting against deep discharging. The system has luminary fitted with energy efficient compact fluorescent lamp (CFL).

SYSTEM OPERATION:

Operation duration: 12 hour, dusk to dawn

Auto / manual: Fully automatic operation

Power source: Solar power

CFL capacity: 11watts

OPERATING VOLTAGE: 12 volts

Power consumption: 14 watt / hour / light.

Solar Photovoltaic Panel:

Capacity: 1 x 74 / 2 X 37 Watts or suitable capacity

Open Circuit Voltage: 21.5Volts

Full Load Voltage: 14.1 Volts

Lamp : 11 Watts CFL

Input Voltage (Nominal) : 12 Volts DC

Efficiency: Approx. 85%

CHARGER CONTROLLER:

Operating Voltage: 12 Volts DC

Auto ON / OFF: Dusk to Dawn

Low Battery: 10.8 Volts (Load OFF)

Over Charging : 14.2 Volts (Charging OFF)

Indicators: Charging Low Battery, Over Charging,

PROTECTION: Inverter Fuse,* with temperature compensation for battery charging extends battery life.

BATTERY:

Type: Lead Acid Battery Low Maintenance

Capacity: 75 AH

Voltage: 12 Volts DC

* The Battery provided is suitable to provide back up for 3 Sunless Days from Dusk to Dawn.

POLE:

Length: 13 Feet from ground level with stepped pole

Thickness: 3.0mm

Diameter: 75 mm dia

Material: M.S. Tube as per IS 1239 Part-1-1990

Painting: Vapor cure type Polyurethane paint {in Pepsi blue / viola blue)

LUMINARY ENCLOSURE:

Material : Single deep drawn M.S. DD material housing with power coating

Protection : Conforms to IP 54 protection for lamp and electronics compartment

Optics: A bowl type cover molded from clear UV stabilized acrylic cover

Reflector : Stainless steel reflector

Gasket : Felt gasket impregnated with insect & water repellant ,

BATTERY ENCLOSURE:

Material: M.S. steel material

Thickness : 1.4 mm

Painting: Vapor cure type Polyurethane paint {in pepce blue / viola blue)