Li-polymer Battery 12v Auto Multi-function Jump Starter With Power Bank

Technical Specification of Li-Polymer Battery 12V Auto Multi-Function Jump Starter With Power Bank:
Size160*75*28mm
Weight 430g
Battery capacity12000mah
Output5V 2A /12V 2A/19V 3.5A
Input15V 1A
Full charge time4 hours
Starting current200A
Peak current400A
Operating temperature-20a -60a

E-power charging Instruction:
1.Plug the home adaptor into the universal socket.
2.Connect 15V 1A input port of E-power to the other end of home adaptor
Or
1.Plug the car adaptor into the socket of cigarette lighter.
2.Connect 15V 1A input port of E-power to the other end of car adaptor.

Jump start 12V vehicle Instruction:
1.Make sure that the number of indicator is not less than 3 ones.
2.Connect the RED clamp to the vehiclea s battery positive a +a terminal and connect the BLACK clamp to the vehiclea s battery negative a -a terminal.
3.Plug the cord of jumper cable into the jump start socket.
4.Start the vehicle
5.When the vehicle is started, remove jumper cable from E-power and disconnect red and black clamps to the vehicle battery terminals within 30 seconds.
6.Leave the vehiclea s engine running.

Charging cell phone or tablet Instruction:
1.Plug the switch cable B to USB 5V 2A output port.
2.Select appropriate connector for your cell phone or tablet and connect it to any of them, E-power can identify and charge the electronic device automatically.The indicators will be on when the device is charging.
3.Press the switch button to charge.