Yellow Juniper Router, Switches And Firewall

We have marked a distinct position in the domain by distributing and supplying of Juniper Router, Switches And Firewall in Delhi, Delhi, India.

Whether you are evaluating, configuring, or managing a product, we have all the information you need in one place. Juniper Networks MX Series 3D
Universal Edge Routers with the Multi-services MPC (the MX Series ). The MX series provides dedicated
high-performance processing for flows and sessions, and integrates advanced security capabilities that protect the network infrastructure as well as user data.
The MX Series includes three models: the MX960, MX480, and MX240, each loaded with the MS-MPC, which provides hardware acceleration for an array of packet processing-intensive services such as Session Border Control functions, state ful firewall, NAT, flow monitoring, and anomaly detection. This integration allows customers to eliminate external firewall sthat consume router ports and additional
management resources. The FIPS validated version of firmware is JUNOS 14.2X4-D10.11 with the
following packages:
Junos OS package jinstall64-14.2X4-D10.11-domestic-signed.tgz
FIPS Mode package fips-mode-i386-14.2X4-D10.11-signed.tgz
JPFE FIPS Package jpfe-fips-i386-14.2X4-D10.11-signed.tgz.
The cryptographic module is defined as a multiple-chip standalone module that executes JUNOS-FIPS
firmware on any of the MX Series routers listed below. The cryptographic boundary for the MX Series is
defined as follows for the validation: the outer edge of the chassis includes the Routing Engine (RE), the MS-MPC, Switch Control
Board (SCB), slot cover in the following configurations:
o For MX240 (2 available RE slots, 2 additional slots): 1 SCB, 1 Routing Engine, at least 1 and
up to 2 MS-MPCs. All empty module bays must have a slot cover installed for proper
cooling air circulation.
o MX480 (2 available RE slots, 6 additional slots): 1 SCB, 1 RE, at least 1 and up to 4 MSMPCs. All empty module bays must have a slot cover installed for proper cooling air
circulation.
o For MX960 (2 available RE slots, 12 additional slots): 1 SCB, 1 RE, at least 1 and up to 4
MS-MPCs. All empty module bays must have a slot cover installed for proper cooling air
circulation.
includes the inverse three-dimensional space where non-crypto-relevantline cards fit, with the
backplane port serving as the physical interface
excluding the power distribution module on the rear of the device
The cryptographic module is defined as a multiple-chip standalone module that executes JUNOS-FIPS
firmware on any of the Juniper Networks MX 3D Universal Edge Routers listed in the table below.
Table 1 Cryptographic Module Hardware Configurations
Chassis PN Power PN SCB PN RE PN MS PN
MX240
PWR-MX480-2400-DC-S
PWR-MX480-2520-AC-S
SCBE2-MX
SCBE-MX
SCB-MX
RE-S-1800X4-XXG
Note: XX = 8, 16 or
32 GB memory
MS-MPC-128
Copyright Juniper, 2017 Version 0.9 Page 4 of 22
Juniper Networks Public Material May be reproduced only in its original entirety (without revision).
MX480 PWR-MX480-2400-DC-S
PWR-MX480-2520-AC-S
SCBE2-MX
SCBE-MX
SCB-MX
RE-S-1800X4-XXG
Note: XX = 8, 16 or
32 GB memory
MS-MPC-128
MX960
PWR-MX960-4100-DC-S
PWR-MX960-DC-S
PWR-MX960-4100-AC-S
PWR-MX960-AC-S
SCBE2-MX
SCBE-MX
SCB-MX
RE-S-1800X4-XXG
Note: XX = 8, 16 or
32 GB memory
MS-MPC-128