Invendis Et-7501 Accl Special Meter

Invendis ET7501 Special Meters, Class 1.0, Self Powered, 240 V, Non standard input, LCD 16X2 ROW, Any OtherACCL with DG kWh , Interuptions , and Under/Over Voltage on EB ,25-25A

Service Type : Single PhaseThree Phase Four Power :From L1 to N Wire. 0.5 Watts; Voltage Channels :85-270 Volts ACCurrent Channels :0-100 Amps External depending on Measurement Type: True RMS using high-speed digital Line Frequency: 50 and 60Hz Waveform Sampling :13 kHz voltage and current Measurements: AmpskWh Accuracy: Better Than 1% Resolution Voltage : 1 V; Current : 0.1 Amp; kWkVAR : 0.1; PF : 0.01; kWH : 1 kWH Indicators: LCD and LED for Power On and Communication indication

Communication Specifications Direct: Modbus over RS-485 Modbus Framing RTU (binary) Communication Rate :9600 baud Data Bits: 8 Parity: None Stop Bit :1 Protocol Modbus Protocol MECHANICAL SPECIFICATIONS Operating Temperature: -7 to +60A C (-20 to +140A F)
Humidity: 5% to 95% non-condensing
Enclosure: Bare PCB Coated for Enviormental protection
Weight (exclusive of CTs): Without Enclosure: Max 1000 g BCM 9 /18 Channel : 155 (L) x 108 H /170 (L) x 108 H Ct card containing 9 CT's :260 * 72MM Mounting: DIN RaiL CONNECTION BCPM ~ CT connectivity: 20 PIN FRC Cable Voltage :1.5 Sq Round Pin Connectivity Micro- Controlled Based Devices for high precisionsmart decisions LCD Display for Electrical Parameters. Single Phase/Three Phase: 25A32A63A. Automatic selection for the Right supply & EB Voltage Limit Monitoring.. Switching of power source based on the user set Under/Over Current levels on DG auto cut off. Also Configuration based on KW available (Optional)l RS 485 serial communication for summator-GPRS Alerts or BMS Integrator. Energy computation for EB / DG ( VIKW etc are available on R 485 Communication Port) Energy Readings backup on EPROM 5 times load Alert before total disconnection. (User Programmable through Port) Wide input voltage range - SMPS Based. LED Status Indication for MainsLoadGenerator & Over Load trip. Option for Base Mount or DIN Rail Mount.
Dimensions: 155 X 200 X 150 mm