Hart To Modbus Tcp Gateway

We are major manufacturer & supplier of Hart To Modbus TCP Gateway in Chennai, Tamil Nadu, India.

Product Details:

Protection LevelIP20
ModelGT200-HT-MT
Installation35mm DIN Rail
BrandSST
Power24V DC (9V~30V), 80mA( 24V DC)
Operating Temperature-20 Deg C to 60 Deg C
Relative Humidity5%-95% RH non-condensing
DimensionW40xH125xD110 mm

GT200-HT-MT is a gateway that can exchange data between HART and Modbus TCP. HART interface can be configured as a primary master or a secondary master Modbus TCP side act as a slave.

Product Features:
Simple to use users can refer to product manuals and application case to achieve communication in a short time according to the requirements of the configuration;
A Ethernet 10/100M adaptive;
Rich debugging features, the command of the subsection mapping function, the visual display of data exchange, HART slave command diagnostic functions greatly facilitate the user's communication test;
With configuration software, it can configure the HART command and parameters of Modbus TCP Server.

Technical Specifications:
HART interface can be used as a primary master or the secondary master;
Supports one HART channel, supports connecting at most 13 ins.meMs with gateway internal resistor (270 0 /2W) and supports connecting 15 instruments with an external resistor (25001/2W);
HART interface supports single-point and multi-point mode;
Under single-point mod, supports data burst operation;
Supports Al commands of the HART protocol;
Each HART command can be configured for change-of-state output, poling output, initialization output or no output;
Supports up to 100 HART commands, the output data buffer area can be up to 2000 bytes, and the input data buffer area up to 3000 bytes;
Each channel can choose to use an internal or external HART sampling resistor;
Supports IP address conflict detection and auto routing ,Modbus TCP slave supports at most 36 connection and 512 command request simultaneously;