F350 Expanding Pu Foam Sealant For Winter Use

AcA A Fast cure, easy to use
AcA A Can be used from -15A A C to +30A A C
AcA A Excellent adhesion to a wide variety of substrates
( except PE, PP and PTFE)
AcA A Excellent stability, no shrinkage, long service life
AcA A High thermal insulation
AcA A High acoustical insulation
AcA A Excellent water and moisture resistance properties
AcA A Can be painted, cut and sanded after completely cured

Direction for use:
AcA A If can temperature is too low, should be put into warm water of 30A A C for 15 minutes or left overnight in room temperature.
AcA A Surface should be clean, free of dust, oil or grease.
AcA A Shake the aerosol can for at least 20 seconds.
AcA A Moisten surfaces with a water sprayer prior to application.
AcA A Vertical gaps should be filled from down to up.
AcA A DonAcA A t fill the entire gaps or holes, as the foam will expand in volume.
AcA A When fill window or door gaps, the gaps maximum gap size should be 3cm, It should not be used in gaps than 5cm.
AcA A If stop the application for time over 5 minutes, remember to shake the can before continuation of work.
AcA A If have to work in layers, repeat moistening after each layer.
AcA A Uncured foam can be removed through using FOAM CLEANER. Cured foam only can be removed mechanically.
AcA A After the foam completely cured, it should be protected from UV by silicone sealant or paint.

Notes:
AcA A The can temperature should be between +5A A C to +35A A C.
AcA A Application temperature is -15A A C ~+30A A C.
AcA A Temperature resistance after cured is +30A A C ~+80A A C.
AcA A Keep away from directly sunlight and not expose temperature over 50A A C.
AcA A Keep away from heat, sparks, flames and static electricity. Turn off sources of ignitions
AcA A DonAcA A t burn or pierce aerosol can even after use.
AcA A Keep out of reach of children.

Storage & Shelf life:
AcA A I2 months unopened and stored in dry and cool condition between +5A A C and +25A A C.
AcA A Always store can with the valve pointed upwards.