Edge Runner/ Mixing Muller

 EDGE RUNNER/ MIXING MULLER
APPLICATION:For mixing of foundry chemicals, pastes, moulding sand, foundry fluxes, food colors etc. Where an amount of binder or agglomerate is to be blended into the material. Also used for densification of the mix. The pan is stationary inside which rotate heavy-duty mullers / rollers. The heavy wide rollers ride over the material where intensive crushing, shearing and mixing action take place. Scrappers and ploughs are provided for directing the mass into the path of the rollers. the machine is also available with granite rolls and pan.
Edge Runner
Individually motorized, made from mild steel of the most efficient design suitable for grinding, pulverizing and mixing. Due to the heavy cross section and free rotation of the roller the charge is ground to a very fine powder in the case of dry material and to a very fine film in case of wet material. Vibrations are kept to the minimum because of the units heavy construction. Scrappers are provided to avoid the material from sticking to the sides and face of the rollers. The housing is totally sealed and prevents material from entering into the bushings and bearings. The discharge door is located at the base for quick and simple discharge operations. The entire unit is mounted on a heavy duty base frame made from steel sections.The drive consists of a suitable make 3 phase 400/440v electrical motor coupled to a reduction gear box complete with input and output coupling.






MODEL


C- 2


C- 3


C- 4


C- 5


C- 6



CONSTRUCTION

M.S.


M.S.


M.S.


M.S.


M.S.




SIZE OF PAN


2'


3'


4'


5'


6'




DEPTH


6"


11"


12"


18"







BOTTOM THICKNESS


10MM


12MM


16MM


20MM







SIZE OF RUNNER DIA


12"


16"


24"


30"







FACE WIDTH OF RUNNER DIA


5"


6"


8"


10"







NO OF ROLLERS


1


2


2


2







CAP IN LTRS


28


85


170


400


700




HP


2


3


7.5


10


2