Dual Action Spray Gun

We are authorized supplier of Dual Action Spray Gun in market. Dual Action Spray Gun has two inlet nozzles, one for compressed air and the other for the fluid. The spray gun also has two trigger levers, one for delivery of air and the other for delivery of fluid/die-coat. When the spray gun handle is pressed partially, the air delivery lever is triggered, thus releasing only a blast of air which helps in cleaning the mould and also provides a cooling effect to the mould. When the spray gun handle is fully pressed, the second lever is also triggered along with the first lever thus releasing a blast of a mixture of air and fluid/die-coat which helps in depositing a fine coat of fluid/die-coat on the mould. The compressed air is supplied to the spray gun at pressures ranging from 3-5 kgs/sq cm and the fluid is supplied to the spray gun at a pressure range of 1-2 kgs per/ sq cm. If a siphon tank is being used for fluid delivery, then it must be kept at a height of 8-10 ft above the operating spray gun level. The flow of the fluid can be accurately controlled and adjusted with the help of a regulating screw provided on the spray gun. The air pressure and its quantity may be controlled at the source which is providing the compressed air. The atomized mixture is made to spray through a nozzle fixed at the end of the delivery tube in a conical shape. The spread of the discharge can be adjusted by screwing or unscrewing this nozzle.