Cp-502 Water Copolymer Emulsion - Ethylene-vinyl Acetate Latex, Flexibility, Waterproofing, Liquid Coating, 1 Mm Thickness

Keeping in mind ever-evolving requirements of our respected clients, we are manufacturing and exporting an exclusive range of CP-502 Water Copolymer Emulsion in Taipei, Taipei Shih / Taipei Hsien, Taiwan. Clients can purchase these products from us at very nominal rates.

CP-502 is Ethylene-Vinyl Acetate copolymer latex, it has film with flexibility.
It can be use to mix cement, extend prolife and reduce stiffness of cement.

Application
* CP-502can be use to mix cement, extend prolife and reduce stiffness of cement, and it has flexibility and waterproofing after cement solidification.
* It is a elastomeric coating used to the surface of a cement wall, the latex can add to more filler and change the viscosity unapparent.
* Thicknessi About 1 mm when just sizing; about 0.8 mm after dry
* Coveragei About 2 Kg/m2 i Dry membrane reach to 2 mmi apply 2~3 timesi

Suggestioni
1. Tools: Brush/ Roller/ Spray Gun
2. Normal: EmulsionAAggregateB11By Weight
3. Enhance elongation performance by increasing emulsion content 5~10%.
4. To get better tensile strength might reduce the usage of emulsion.
5. Dilute with water if apply by roller or spray gun. Add 10
6. Avoid cracking, shrinking or other paint failure by following

Primeri CA-002 or CA-003 dilute 2~3 times for using
Coatingi Water-base Paint. Test before using, if apply solvent-base paint.
Dilute agenti Wateri 5i 10% for rolleri