Commercial Reverse Osmosis Water Filtration System

We are engaged in offering excellent quality Commercial Reverse Osmosis Water Filtration System to our valuable clients.
Caution:
Carbon filter flushing
After the installation or changing carbon filter, manual flushing valve shall be opened for 2-3 min before operation (process: water flow for 2-3 min)
Auto flushing (RO membrane)

Installation step:
Tubing connections on the back of products should be connected with each use (inlet water, drink water, tank, drain), but, if the tank is not a pressure tank, water, level switch must be set the tank separately
Carbon filter need to be flushing with manual flushing valve for 2-3 min the initial installation
Set the local time of timer for bypass and bypass time you want
Turn on the system
Once pressure tank is filled up water and the system is automatically stopped, faucet shall be opened and the stored water shall be out of the tank

RO membrane:
Membrane type: polyamide thin-film composite
Maximum operating temperature: 113A F (45A C)
Maximum operating pressure: 125psi (8.6bar)
Permeation flow rate (GPD) of RO membrane depends on the quality of raw water

HCRO-400G components:
Pressure gauge: measure range (0-1Mpa)
Flow meter: 0-150LPH (liter per hour)
TDS meter: raw water and drinking water
Emergency switch: DC 24V/12A, AC 250V/6A
On-off switch: 250V/16A
Circuit breaker: MCCB (molded case circuit breaker, 10A)
AC-DC adaptor: 110-240V, 50-60Hz, 3.0A (for RO pump)
Auto flushing: auto flushing controller