Automatic And Coreless Winder For Spiral Wound Gasket

These Automatic And Coreless Winder For Spiral Wound Gasket is a type of special equipment matching other spiral machines. It can be used to press flat soft metallic strip to a Va or a Wa shape in the production of spiral wound gaskets. The technical parameters of the machine are strictly fixed. All the performance indexes of the gaskets produced by the metallic tape have meet the international technical standards.
P.S. It has been exploited into another uses, both as a shape machine and as a spiral machine (the maximum winding diameters DN200) a
spiral wound gasket machine (SGC-800A)i This machine is a kind of special equipment for winding during producing the spiral wound gaskets.

Main technical parameter:
Voltage : 380V50 HZ
Power : 0.8 KW1380rpm
Mini winding diameter : DN50
Max winding diameter : DN800
Width of winding sealing plane : 50mm
Cylinder travel : 100mm(60mm is used)
Pneumatic pressure : 0-0.8Mpa
Voltage regulator : 0-15V
Automatic attenuation voltage : 0-3Va
spiral wound gasket machine(SGC-2800A) : This equipment work simultaneously with the advantage of using steel strip to wind directly (according to the girth of the gasket calculated from the diameter) without using spiral chip mould.
Main technical parameter :
Voltage : 380V50HZ
Power : 0.55KW(the speed varies infinitely)
Mini winding diameter : DN240
Max winding diameter : DN2800
Width of winding sealing plane : 5mm-50mm
Cylinder travel : 100mm
Pneumatic pressure : 0-0