Acrylic Primer - Deep Impregnating Polymer Blend, Excellent Bonding With Porous Substrates, Effective For Dust Proofing And Waterproof Coatings

Acrylic Primer

Holding years of experience and knowledge in this industry, our company has been able to mark its strong presence in the market as one of the most excellent manufacturers and supplier of Acrylic Primer. Keeping in mind diverse industrial need, we develop these primers using high grade components and latest technology. This Acrylic Primer is highly used during the coating of walls and concrete. Owing to attributes such as easy brushing, excellent covering and better sealing power, these primers highly used during coating.

Further details:

D.I PRIMER for Surface Preparation

Description

SAVE- IT 201 is a deep impregnating primer designed by blending special grade of polymers with synthetic binders. Its deep impregnating action and low viscosity helps it to attain better bonding with highly porous cementitious substrate.

Uses

SAVE- IT 201 is best suitable when used as a primer coat after surface preparations for all types of waterproof coatings. It can also be used as a dust proofer and floor sealer for dust proofing purposes.

Advantages

SAVE- IT 201 provides the following beneficial properties:

A A Aca A A a A A. Helps in sealing all dust and loose particles when used as a primer.

A A Aca A A a A A. Can be used as a dust proofer / sealer.

A A Aca A A a A A. Can act as a good primer / bond coat for all type of waterproof coatings.

A A Aca A A a A A. Has very good bonding with all cementitious substrate.

A A Aca A A a A A. Enhances coverage of overcoats.

A A Aca A A a A A. Economical and easy to use.

Coverage

SAVE- IT 201 will give a coverage of 5-7 sqmt. / KG / coat depending on the porosity of the surface.

Instructions for Use

Surface Preparation

Concrete, mortar and masonry surface must be clean, free from grease, oil and loosely adhering particles. The surface must be as true and flat as possible. Efficient surface preparation is essential to achieve high adhesive quality of the product.

Application Method

Apply SAVE- IT 201 over the prepared surface using a brush, squeeze or broom. One coat is normally sufficient. Highly porous substrate may require two coat applications. After the coat of SAVE- IT 201 the surface is ready for further top coats.

Technical Data

Form : Liquid

Type : Special polymers blended with synthetic binders

Sp. Gravity : Approx 1.03 kg. / Lit.

Shelf Life : One year when unopened

Colour : White, Will turn colourless on drying.

Drying time : 2-3 hours

Packing

SAVE- IT 201 is available in 25 and 200 Kg Drums

Storage

Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.

Note

Field service, where provided, does not constitute supervisory responsibility. For additional information contact your local SAVE-IT representative. SAVE-IT reserves the right to have the true cause of any difficulty determined by accepted test methods.

Disclaimer

Whilst any information contained herein is true, accurate and represents our best knowledge and experience, no warranty is given or implied with any recommendations made by us, our representatives or distributors, as the conditions of use and the competence of any labour involved in the application are beyond our control.