Universal Repair Polymer

Universal
Repair Polymer

Backed by the well
equipped infrastructural facilities and experienced personnel, our company has emerged
as one of the well established manufacturers and suppliers of Universal Repair Polymer. We develop
these polymers using quality components and advanced technology. Owing to
attributes good abrasion resistance, slurry consistency and non-toxicity, our offered Universal Repair Polymer is
highly demanded in the market. This repair polymer is used in internal & external waterproofing and damp proofing applications. Clients can avail this repair
polymer from us at reasonable prices.

Further details:

HIGH STRENGT ACRYLIC POLYMER FOR CEMENTITIOUS COATING

Description

SAVE- IT 202 is READY TO USE acrylic polymer for making a cement based polymer modified waterproofing slurry coating. It is applied to concrete and mortar structures to prevent water infiltration and dampness.

Uses

SAVE- IT 202 is used for , hairline crack sealing, and protection from chloride in the following structures:

A A. Water Aca a tanks

A A. Basements

A A. Terraces and balconies

A A. Bridges

A A. Retaining Walls

A A. Small Flat Roofs

Advantages

SAVE- IT 202 provides the following beneficial properties:

A A. Easy to apply by brush, slurry consistency

A A. Good adhesion to sound & prepared substrates

A A. Good abrasion resistant

A A. Protects against water penetration, salt & carbonation

A A. Non-toxic when cured, suitable for contact with drinking water

A A. Slightly flexible

Coverage

Depending on type of application, 2 coats are always required. It gives coverage of 3 to 4 sqmtr / kg / coat. Normally two coats should be applied. In extreme cases three coats may be required.

Instructions for Use

Surface Preparation

Concrete, mortar and masonry surface must be clean, free from grease, oil and loosely adhering particles. Steel and iron surfaces must be free from scale, rust, grease and oil. The surface must be as true and flat as possible. Saturate absorbent surface thoroughly. Efficient surface preparation is essential to achieve high adhesive quality of the product

Mixing

A pre-batched mixture of good quality cement with clean fine sand (500 microns) should be prepared with cement and sand in equal proportions by weight. This should be mixed with SAVE- IT 202 in proportion of one part SAVE- IT 202 to four parts of mixture to form a slurry. For trowellable consistency and putty, the proportions of SAVE- IT 202 should be reduced accordingly. The mixing of slurry should be done in a clean container by slowly adding the powder component to SAVE- IT 202 and stirring with a slow speed mixer (500 - 600 rpm). Mixing should be done until the consistency is free from lumps.

Application

Dampen all surfaces immediately ahead of the slurry application. Whilst the surface is still damp from saturation, apply the first coat and leave to harden (2-6 hrs.). For slurry consistency apply with a hard plastic bristled brush or broom. For trowellable mortars use a notched trowel. After the second coat has been applied, finish by rubbing down with a soft dry sponge. For water proofing slurry should be applied at the rate of 3-4 kg/m2 for two coats.

Curing

As with all cement based products, curing is important. Protect the freshly applied product against direct sunlight and strong winds. Use damp hessian or polythene to aid curing, for 3 days. Then allow to dry out.

Technical Data

Form : Liquid Type : Synthetic Dispersion

Sp. Gravity : Approx 1.1 kg. +/- 2% / Ltr Shelf Life : One year when unopened

Packaging : 10, 25, 50, 100, 200 kg Drums. Storage Condition : Protect from direct sunlight

Storage

Store under cover, out of direct sunlight and protect from extremes of temperature. Failure to comply with the recommended storage conditions may result in premature deterioration of the product or packaging.