Eco-friendly 10 Toyota Corolla 1zr Gasoline Engine Disassembly And Operation Training Platform

1. Product introduction
The training bench is composed of two parts: the disassembly and assembly flip bench of the Toyota Corolla 1ZR electronically controlled gasoline engine assembly (easy to disassemble and assemble) and the operation inspection console. The disassembly and assembly turning stand provides trainees with engine disassembly and assembly training. After the engine is assembled, it can be connected to the operation inspection console, and the engine can be started and operated to test the assembly effect of the engine.
two. Features
1. The color inkjet circuit diagram is drawn on the panel of the training platform. Students can intuitively compare the circuit diagram and the real object of the electronically controlled gasoline engine to understand and analyze the working principle of the control system;
2. The training platform consists of two parts: the disassembly and assembly of the overturning platform and the operation and detection console.
The disassembly and reversing bench is composed of an electronically controlled gasoline engine assembly and an engine disassembly and assembly frame that can be turned 360 degrees. The operation inspection console is composed of a control panel, an engine electronic control unit, a cooling system, an oil supply system, and a battery;
3. The disassembly and reversing stand with the reducer can be turned over and stationary at any axial angle, and can be easily disassembled and assembled for training. An oil tray is placed at the bottom to facilitate the collection of small parts, water and oil. to three do not land;
The operation inspection console frame is equipped with all the components for starting and running the engine, such as electronic control unit, water tank, oil tank and oil pump, instrumentation, ignition switch, etc. , can run the engine (acceleration/deceleration/idle conditions are normal), and check the effect of engine assembly;
4. The color UV flat-panel inkjet circuit diagram is drawn on the panel of the training platform. Students can intuitively compare the circuit diagram and the actual engine to understand and analyze the working principle of the control system;
5. The panel is made of 4mm-thick high-grade aluminum-plastic panel that is corrosion-resistant, impact-resistant, pollution-resistant, fire-resistant, and moisture-proof. The surface is treated with a special process of spraying primer; the panel is printed with a color system circuit diagram that never fades. Installed with detection terminals, which can directly detect the electrical signals of each sensor, actuator, and engine control unit pins on the panel, such as resistance, voltage, current, frequency signals, etc.;
There are automobile instruments, fuel pressure gauges, and vacuum pressure gauges installed on the training platform panel, which can display the changes of parameters such as engine speed, fuel injection pressure, and intake manifold pressure in real time;
6. The training bench is equipped with a diagnostic seat, which can be connected to a dedicated or general-purpose car decoder to perform self-diagnosis functions such as reading fault codes, clearing fault codes, and reading data streams for the engine electronic control system.
7. The training platform is equipped with installation protection devices such as the main power switch and the flywheel protective cover.
8. The base of the training platform is welded by steel structure, and the surface is treated by spraying process.
9. In order to better carry out the training and teaching of the electronic control system, the supporting signal simulation system (integrated):
The simulation system uses a touch screen larger than or equal to 7 inches and adopts resistive touch to ensure long service life and high touch accuracy.