10 Mm/s Working Speed And 35 Mm/s Return Speed Horizontal Bending Press Brake Pp200 Dimension(l*w*h): 958 X 1200 X 1126 Millimeter (Mm)

Horizontal Bending Press Brake PP200 has been manufactured in a 60mm thick welded steel monoblock, stabilized and mechanized. Its robustness, versatility and easy handling are just three of the best features our hydraulic horizontal bending machine has.

ADVANTAGES
Easy handling: The machine is sent completely assembled, it is only necessary to connect it to the required power supply and start perfoming.
Versatility: Nargesa PP200 has a catalog with a great deal of optional tooling. (See at the bottom of the page in optional toling and sample video).
Easy fabrication of tooling: The customer himself or any toolmaker can manufacture dies and punches.
Folding operation with no risk of damaging the punches and dies with thick materials unlike conventional press brakes.
Folding flat bars and sheets into completely close shapes. Conception of this horizontal bending press brake allows to make folding operations impossible to be carried out on a conventional press brake.
Fast tool change, punches and dies: This change does not take more than 30 seconds most of the times.
STANDARD TOOLING: Horizontal press brake PP200 includes the complete 4VA AcA A A A s folding die. (See bottom of the page in standard accesssories).

Technical Characteristics :-
Working Strength : 20.000 Kg (200 Kn).
Working Speed : 10 Mm/s.
Return Speed : 35 Mm/s.
Maximum Displacement : 250 Mm.
Repetitivity : 0,05 Mm.
Bench Size : 600x1170 Mm.
Working Height : 950 Mm.
Programming Mode : Manual or Automatic.
Safety Double Acting Hold Pedal.
Mechanically Guided Piston.
Piece Counter.
Pressure Regulator.
Engine Power : 2.2 Kw/3 Hp a 1400 R.P.M.
Electric Tension : 230/400 v Three-Phased.
Intensity : 9/5 A.
Hydraulic Pressure : 50 a 215 Kg/cm2.
Hydraulic Pump : 7,5 Litres/minute.
Tank Capacity : 27 Litres.
Dies support shelf included.
Palletized lower bench to easily transport the machine up to its working or storage site.
The machine is sent completely assembled.
Packing included: Wooden pallet NIMF15 and three layer cardboard apt for suitable for sea freight.
All our products are manufactured in our facilities in Spain. Hydraulic and electrical components are all standard from the best leading European trademarks with technical support all over the world: Rexroth, Bosch, Roquet, Schneider Electric, LG, Telemecanique, Pizzato, etc.