Waterproofing Membranes In Chennai

Price: 350 INR (Approx.)/Liter

MOQ - 5 Liter/Liters

Application - Construction

Product Type - Greenseal Polydek Waterproofing Membranes

Main Material - Cement

Price: 1 INR (Approx.)/Roll

MOQ - 1000 sqft Roll/Rolls

Product Type - TPO Waterproofing Membrane

Main Material - BMI GAF EverGuard TPO Waterproofing Membrane

Size - 30.5m L * 3.05m W

Price: 130 INR (Approx.)/Square Meter

MOQ - 1 Square Meter/Square Meters

Product Type - Modified Bitumen Membrane

Main Material - Polymat APP Modified Bitumen Membrane

Usage - Roof,Basement,Tunnel

Price: 200 INR (Approx.)/Square Foot

MOQ - 100 Square Foot/Square Foots

Application - Industrial

Size - 20 MTR

Usage - BASEMENT, RETAINING WALLS

MOQ - 500 Foot/Feet

Application - Industrial

Product Type - Black Waterproofing EPDM Membrane

Main Material - EPDM

Product Type - EPDM Roofing Membrane Waterproofing For Construction Use(High Strength)

Feature - light weight

Price: 35 INR (Approx.)/Square Foot

MOQ - 1000 Square Foot/Square Foots

Application - Terrace, Roof Asbestos Sheet, Metal Sheet Etc.

Product Type - Waterproof Material

Main Material - Tarfelt Or Bituminous Product

Application - Various types of construction projects

Product Type - Single Component Elastomeric In-Situ Liquid Membrane

Main Material - Elastomer

MOQ - ANY Kilograms/Kilograms

Application - Construction

Product Type - waterproofing coat, terrace waterproof coating

Usage - Waterproofing

Price: 13930 INR (Approx.)/Container

MOQ - 20 Container/Containers

Application - ASCOSHIELD PU is pre-mixed and ready to use. ASCOSHIELD PU may be applied by brush or paint roller. Prior to applying to general surface area, pre-treat all cracks, joints, corners and coves first, by applying a generous coat of ASCOSHIELD PU approximately 10 cm (4aEUR) to each side of joint or surface. Allow to dry to the touch and then apply a second coat of ASCOSHIELD PU to same area, again allowing to dry. Once pre-treated areas are dry, apply a generous coat of ASCOSHIELD PU to entire surface, included pre-treated cracks, joints, and coves, and allow to dry. DO NOT skimp on initial coat of ASCOSHIELD PU. Allow to dry to the touch, before applying a final coat to entire surface. Final dry thickness of first and second coats should be a minimum of 0.5 aEUR" 0.75 mm. Inspect entire area and, if required, reapply on required areas, and allow it to dry.

Product Type - WaterProofing & Tile Fixing

Surface Treatment - Blocks, Brick, Concrete, Renders etc.