Addition Cure Mould Rubber Rtv 2

Addition Cure Mould Rubber RTV 2 introduction :
Two component room temperature poly addition curing fluid compound which cures with low shrinkage to a strong flexible mould rubber, it has high temperature and chemical resistance making it well suited for reducing models with undercuts in polyurethane and epoxy resins..

Two component liquid silicone rubber, pourable,catalyst by platinum ( addition curing) mixed ratio of part 10A :1B , that could vulcanizeds at room temperature making mould product offering excellent mechanical. High tear strength

LH-45/curing agent is a mold making rubber developed for prototype design and production tooling, especially for rapid protyping application

Liquid silicone rubber in additional Use instruction

1. Clean the surface of the original should be clearn and free of loose material.
2. With cleaning tools ,Mixed weight 100parts of silicone base and 10parts of curing agent in a clear container, then mix together until the curing agent is completely dispersed in the base. After the silicone rubber and the curing agent are completely mixed, put the silicon into a vacuum machine for desiring to remove the bubbles.the mixed should be inspected if free of bubbles. After desired, pouring the liquid silicone rubber into the product to be duplicated or into the mold frame.