Automatic Capsule Filling Machine - Stainless Steel, Compact Design For High-volume Production | Efficient Tablet And Powder Feeding With Advanced Vacuum Separation

Firstly the tablets are guided into leading spring tubes via guide rails of a vibratory feeder. They are then fed into capsule bodies through a reciprocating pusher device in a safe and firm manner.
The tablet feeding station can be installed before or after the powder or pellet feeding station.

Automatic Capsule Filling Machine is described station by station :
1. Empty gelatin capsules are fed from a storage hopper to the rectifier, and inserted with the aid of vacuum into one of the 12sets of carrier segments each carrier segment holds 5empty capsules
2. The carrier segment's upper holder holding the caps is now lifted separation of cap and body is assisted by vacuum
3. The upper holder starts retracting while the lower proceeds to the dosing station
4. Complete retraction of the upper holder is done at this station
5. Powder slug is inserted into the capsule body; when there is no capsule body held at the lower holder, the powder slug will be further pushed downward and collected in a receiver tray
6. Two station reserved for attachments to fill pellets or other granulated products
7. Two station reserved for attachments to fill pellets or other granulated products
8. Ejection of un-separated capsule or the up-side-down capsule caps is performed with an aid of 5upward stroking rods
9. Upper holder starts moving outward to the position above the lower holder.