Polyanionic Cellulose In Zibo

MOQ414 Kilograms/Kilograms

StorageRoom Temperature

Physical FormPowder

MOQ5000 Kilograms/Kilograms

Shelf Life2 Years

CAS No9000-11-7

AppearanceWhite Powder

Physical FormPowder

StorageRoom Temperature

UsageApplicationApplication in fresh watersea water and saturated wateraEUR++ small usagehigh yield.aEUR++ Good anti-salt and anti-bacteria propertyconvenient to use.aEUR++ Reduce the fluid loss and improve the viscosity significantly.Applications in drilling fluidaEUR++ Protect the wall of oil wellprevent mud flowing away and carry crumbs.aEUR++ Protect drilling bit and increase drilling speed.aEUR++ In low solid or none solid drilling fluidit can reduce the fluid loss and thickness of the mud cake obviously.aEUR++ Strong inhibition effect to shale hydration.Applications in fixing fluidaEUR++ Protect the wall of the oil wellstop the fluid entering into the pores or cracks.aEUR++ Control the fluid viscosityheavy object suspensionand prevent fluid loss.aEUR++ Instant productsused in severe environmentit will be more convenient and simplerand it will be more effective in mud allocating.PAC&CMC can be used in drilling fluidfixing fluid and fracturing fluid.In drilling fluidit works as viscosifierfiltration reducerand rheology controller;in fixing fluidit is used to control fluid viscositysuspend heavy objectsand avoid fluid loss;in fracturing fluidit is used to carry stuffing and avoid fluid loss.The Food gradeToothpaste GradeMining gradeDetergent gradeCeramic GradePaper Making gradeCoating Material grade Textile grade etc be supplied as well.

MOQ5000 Kilograms/Kilograms

Physical FormPowder

Shapeother

UsageApplication1 PAC application in the drilling fluidPAC for fluid loss inhibitors and water is ideal PAC fluid mud can be prepared in high salt medium clay and shale inhibition dispersion and expansion of the shaft so that the pollution under control. 2 PAC workover fluid in the applicationPAC prepared using workover fluid is a low-solid-phase and not because of the solid layer and the blocking of the infiltration capacity of the production would not be harmful to the production floor; and the loss of low water so that production level to reduce the amount of water and access to water emulsion will be formed by blocking phenomenon Township. PAC prepared using workover fluid to provide hydraulic workover other advantages not available. Production level to protect against permanent damage; Clean the hole with a carrying capacity and the maintenance of boreholes to reduce the workload; Resistance to water and sediment have the ability to infiltrate and few foaming; Can be stored or transferred between the wells and wells and workover fluid mud than the average and low cost. 3 PAC in the fracturing fluid applicationsPAC prepared by fracturing fluid capability 2% KCI solution (the preparation of the fracturing fluid must be added) and dissolution performance ease of use you can Site preparation and gel fast strong ability to carry sand. Osmotic pressure in the formation of low use and its fracturing effect of the more remarkable.4.Other applicationsPaper-making and Food field and Paint Industries.

StorageRoom Temperature

Shelf Life2 Years

AppearanceWhite Powder