Weight Transmitter (At10)

Features:
DIN Rail Mounting
20-pole terminal block for connection up to 4 load cells
20 to 28 Vdc power supply
Input signal from 3 to 30mV
Adjusting Zero and Full Scale through Dip-switch and trimmer

Technical Characteristics:
Power supply: 24 Vdc A 15%
Transducer voltage: 10 Vcc (max 4 350 Ohm beam load cells)
Power consumption: 6 W
Analog output: 0A.5 Vcc, 0A.10 Vcc, 4A.20 mA
Full scale range: 3A.30 mV/V
Linearity: A 0.02% FS
Temperature range: -10 A. +50 A C
Storage temperature: -20 A. +70 A C
Thermal stability: 20 ppm/ A C
Gain drift: 0.005% FS/ A C
Calibration on zero: by 4 dip-switches and a 20 spin trimmer
Full scale calibration: by 4 dip-switches and a 20 spin trimmer
Analogical filter: Set up by single turn trimmer 270A C
Mounting: on DIN guide
Dimensions: 133 x 92 x 56 mm (L x H x D)
Connection: Screw terminals 5.08 mm
CE certifications: EN50081-1, EN5002-2 EMC, EN61010-1 LVD
Options: Voltage 115 o 230 Vca 50/60 Hz (for DIN's guide)