Trantorque Keyless Bush

We have gained immense recognition in the industry by offering a quality assured range of Trantorque Bushes that is used to eliminate the axial movement. The offered bushes are used for mounting and adjusting drive components. These bushes are manufactured by our technical professionals in line with the predefined industry norms using quality approved raw material and sophisticated technology. High in strength and rust proof nature, our clients can avail these Trantorque Bushes in different specifications according to their exact needs.Features:  Fine finish High strength Easy installation Robust construction Specifications: Torque transmission: Medium, Self centering. Too Low installation time. The concentricity error varies from 0,02 mm to 0,04 mm (T.I.R). Aunique feature is the ability to mount hubless components. The precision-machined outer element ensures a perpendicular, flat mounting face. This allows the use of plate sprockets, hubless gears, disc brakes, etc., often at substantial cost savings. Problem weld-on hubs are a thing of the past. Installation: Clean contact surfaces of hub bore and shaft. If necessary, apply a slight amount of oil on both contact surfaces. Please do not use lubricants containing silicone or molybdenum disulfide. Insert the locking assembly in to hub & on to shaft, making sure the matching hub is flush against the shoulder at the hex flats. Position the assembly at the desired location on the shaft and hand-tighten the nut (clockwise) until the assembly becomes snug on the shaft. Tighten the nut to the proper installation torque using a torque wrench. See table for torque value. The hex flats on the outer ring are provided for counter-torque, eliminating the need to hold the component or shaft while applying installation torque. At full installation torque, the assembly will have slightly moved axially along the shaft away from the nut. If axial position is critical it may be necessary to loosen the nut and reposition the assembly