Sg Eot Crane - Rolled Steel I Section, 15 Ton Capacity, 25 M Span, 6 M Lift Height | Modular Hoist Unit, Push Button Control, Safety Panel Features

The SG EOT Cranes are designed in accordance with IS: 807, IS: 3177. Suitable factor of safety are considered as per duty class I, II, III & IV the crane bridge is designed either from Rolled Steel I Section or fabricated with Plates. End carriage are fabricated from Rolled steel I - section or with plates & provided with L- type(Housing) double flanged or Pad plate type wheels of suitable diameter of wheels with spherical roller bearings.

Capacity : Up to 15 Tons
Span : Up to 25 Mtr.
Lift of height : 6 Mtrs & Above

Hoist Unit

Varun Hoist unit are designed in accordance with is 3938 having modular construction suitable to run on I section or Box girder. Hoist & cross travel motor, gear box, and Brake are easily accessible for maintenance.

Long Travel Drive

Either twin or centrally driven provided depending on span length and capacity of the crane .

Control Equipment

Operated through push button station or Cabin operated with master control or remote control.

Control Panel

Each motor is operated by push button through contactors having Control voltage of 24V/110V for safety of operator. Protective panel consisting of overload relay, MCB / Fuses housed in control panel box. Electrical supply shall be AC 3ph, 400/440V, 50HZ

Test Load:-
The crane shall be tested at 25% overload of safe working load, Test load are to be arranged by purchaser at site.

Special Features:-
Designs conform to IS-807, IS-3177.Optimum Design ensuring minimum Dead Weight, Wheel