Varun Eot Cranes - Single Girder, Up To 15 Ton Capacity, 25 M Span, 6 M Lift | Is 3938 Hoist, 24v/110v Control, Modular Design, Overload Tested

The Single Girder EOT Crane are designed in accordance with IS: 807, IS: 3177. Suitable factor of safety are considered as per duty class I, II, III & IV the crane bridge is designed either from Rolled Steel I Section or fabricated with Plates. End carriage are fabricated from Rolled steel I - section or with plates & provided with L- type(Housing) double flanged or Pad plate type wheels of suitable diameter of wheels with spherical roller bearings.

Capacity : Up to 15 Tons
Span : Up to 25 Mtr.
Lift of height : 6 Mtrs & Above

Hoist Unit:-
Varun Hoist unit are designed in accordance with is 3938 having modular construction suitable to run on I section or Box girder. Hoist & cross travel motor, gear box, and Brake are easily accessible for maintenance.

Long Travel Drive:-
Either twin or centrally driven provided depending on span length and capacity of the crane .

Control Equipment:-
Operated through push button station or Cabin operated with master control or remote control.

Control Panel:-
Each motor is operated by push button through contactors having Control voltage of 24V/110V for safety of operator. Protective panel consisting of overload relay, MCB / Fuses housed in control panel box. Electrical supply shall be AC 3ph, 400/440V, 50HZ

Test Load:-
The crane shall be tested at 25% overload of safe working load, Test load are to be arranged by purchaser at site.
Special Features
Designs conform to IS-807, IS-3177.Optimum Desig