Block Joining Adhesive

Block Joining Adhesive

Features

High Bond Strength
Special polymers imparts high adhesive strength (3.4Mpa) increasing overall masonry strength & load bearing capacity.

No Shrinkage Cracks
Water is retained in mortar, thus preventsshrinkage cracks.

High Thermal Insulation
Thin joints prevent head transfer through material walls.

Zero Wastage
It is easy to apply and avoids wastage of material

No Curing Required
Due to water retention polymers, curing is not essential after application.

High coverage
Due to lower density & higher volume, a 40 kgs bag of adhesive covers 200-225 sq. ft. with a thickness 3mm (for 4" thick AAC blocks).

Economical
Quantity of adhesive required for laying Premixed blocks is 3 times less than conventional a mortar.This saves money as well as time.

Premixed
No jobsite blending of powder is required,only water is to be added.

Comparison

Block Joining Adhesive Conventional Mortar

Cement (0.5 300 Rs. Per bag)=Rs. 3+
Approx. Rs. 3.5 / sq. ft. Sand (0.045 cft @ Rs. 40 per cft )=Rs. 1.80
Total = Rs. 4.8 per Sq. Ft.

Fast Application Not Possible

Plastering possible after 24 hours Minimum 7 days curing required

Consistent quality due to computerized Manual mixing and not possible to test every Batch
mixing and tested raw material

High bond strength (almost 5 times Not possible due to difference in properties of blocks and mortar

more than conventional mortar)

Negligible Shrinkage Crack More Shrinkage Cracks

Easy Handling and Storage Difficult to keep of stock of different components and high wastage

Technical Specification

Properties Specification
Appearance Grey Powder
Water Required 35%
Pot Life 1.5 - 2 hrs
Curing Not required
Tensile Adhesive Strength 3.4 Mpa (as per ASTM-C1660)
Coverage 200 - 225 sq. ft. (for 4" thick blocks)

Available Brands