Picoscope 5000 Series Flexible Resolution Usb Oscilloscope/mso 8 To 16 Bits

PicoScope 5000 Series -FlexRes 8 to 16-bit hardware resolution USB Oscilloscope - FlexRes 8 to 16-bit hardware resolution - Up to 200 MHz analog bandwidth - 1 GS/s sampling at 8-bit resolution - 62.5 MS/s sampling at 16-bit resolution - Up to 512 MS capture memory - 16 digital channels on MSO models - 130 000 waveforms per second - Built-in arbitrary waveform generator - 18 serial decoding protocols as standard - Up to 200 MHz spectrum analyzer Todaya s electronic designs employ a wide range of signal types: analog, digital, serial (both high- and low-speed), parallel, audio, video, power distribution and so on. All need to be debugged, measured and validated to ensure that the device under test is functioning correctly and within specification. To handle this variety of signal types, PicoScope 5000D FlexRes hardware employs multiple high-resolution ADCs at the input channels in different time-interleaved and parallel combinations to optimize either the sampling rate to 1 GS/s at 8 bits, the resolution to 16 bits at 62.5 MS/s, or other combinations in between a you select the most appropriate hardware resolution for the requirements of each measurement. 2 and 4 channel models are available, all featuring a SuperSpeed USB 3.0 connection, providing lightning-fast saving of waveforms while retaining compatibility with older USB standards. The PicoSDKAR software development kit supports continuous streaming to the host computer at rates up to 125 MS/s. The product is small and light, and operates silently thanks to its low-power fanless design. Supported by the free-of-charge and regularly updated PicoScope 6 software, the PicoScope 5000D Series offers an ideal, cost-effective package for many applications, including design, research, test, education, service and repair. High bandwidth, high sampling rate: Despite the compact size and low cost, there is no compromise on performance, with bandwidths up to 200 MHz. This bandwidth is matched by a real-time sampling rate of 1 GS/s, allowing detailed display of high frequencies. With a real-time sampling rate of five times the input bandwidth, PicoScope 5000 Series oscilloscopes are well equipped to capture high-frequency signal detail. For repetitive signals, the maximum effective sampling rate can be boosted to 10 GS/s by using Equivalent Time Sampling (ETS) mode. Serial bus decoding and analysis: With its deep memory, the PicoScope 5000D Series can decode 1-Wire, ARINC 429, CAN and CAN-FD, DALI, DCC, DMX512, Ethernet 10Base-T and 100Base-TX, FlexRay, IA C, IA S, LIN, Manchester, MODBUS, PS/2, SENT, SPI, UART (RS-232 / RS-422 / RS-485) and USB 1.1 protocol data as standard. PQ143-PicoScope 5242D60 MHz 2-channel oscilloscope PQ149-PicoScope 5242D MSO60 MHz 2-channel mixed-signal oscilloscope PQ146-PicoScope 5442D 60 MHz 4-channel oscilloscope PQ152-PicoScope 5442D MSO60 MHz 4-channel mixed-signal oscilloscope PQ144-PicoScope 5243D 100 MHz 2-channel oscilloscope PQ150-PicoScope 5243D MSO100 MHz 2-channel mixed-signal oscilloscope PQ147-PicoScope 5443D 100 MHz 4-channel oscilloscope PQ153-PicoScope 5443D MSO100 MHz 4-channel mixed-signal oscilloscope PQ145-PicoScope 5244D 200 MHz 2-channel oscilloscope PQ151-PicoScope 5244D MSO200 MHz 2-channel mixed-signal oscilloscope PQ148-PicoScope 5444D 200 MHz 4-channel oscilloscope PQ154-PicoScope 5444D MSO200 MHz 4-channel mixed-signal oscilloscope Your PicoScope 5000D Series oscilloscope kit contains the following items:a c PicoScope 5000D Series oscilloscope a c 1 x TA155 Pico blue USB 3 cable 1.8 m a c 60 MHz models: 2/4 x TA375 probes a c 100 MHz models: 2/4 x TA375 probes. a c 200 MHz models: 2/4 x TA386 probes. a c 4-channel models: 1 x PS011 5 V 3.0 A PSU a c MSO models: 1 x TA136 MSO cablea c MSO models: 2 x TA139 set of MSO clip