Industrial Magnetic Drive Mixers

Our company is engaged in manufacturing, supplying as well as exporting an extensive range of Industrial Magnetic Drive Mixers in Billimora, Gujarat, India. It is widely used for Pharmaceutical Applications, Seal-less Magnetic Drive Bottom Mounted Mixers are known for durability and efficiency. The Magnetic Drive Mixers have Impeller Magnets. The Impeller Magnets are designed to operate in pharmaceutical processes. Therefore, the Magnetic Drive Mixers are made free from cavities, hidden areas, and sharp corners and are electro-polished to a high degree of smoothness. The Magnetic Drive Mixer is available in Stainless Steel and High Nickel Alloys. Fabricated Vessels with Glass body are also available.

Product Details:-
Minimum Order Quantity1 Unit
Operating PressureUpto 7 Bars
Tank CapacitiesUp to 30000 Litres
MaterialStainless Steel , High Nickel Alloys
Operating Temperature- 800 Degree Celsius To + 200 Degree Celsius
Liquid ViscositiesUp To 800 CP

Features:
Zero Leakage Sealless Design
SIP / CIP Capable
Complete Drainable Design
Surface Finish of the wetted parts achieved up to 0.25 Ra

Useful For:
Pharmaceutical Applications
Media preparationBuffer preparation
Cell Culture
Fermentation
Harvesting
Purification
Filtration
Chromatography
Centrifugation
Dairy applications
Food & Beverage Industries
Custom built Reactor Vessels
Laboratory applications

Impeller Magnet (Mixing Head):
Impeller Magnets basically consist of the following parts:
Permanent Magnets capsulated in a Stainless Steel 316L Body
Female Bearing fixed in the Stainless Steel 316L part
Wings that links the Magnet Body and the Female Bearing

Male Bearing:
Male bearings are made as follows:
A Stainless Steel 316L stud with connection thread to the Weld Plate is used. Groove for the O Ring, Tightening Nut and shrinking tolerances for the bearing material is provided
A solid piece of bearing material i.e. Sintered Silicon Carbide is fixed to the Stainless Steel stud by heat shrinking process.
The Outer surface of the bearing is then ground and polished to necessary tolerances

Weld Plate (Tank Plate):
The Weld Plate is made from a single piece of material and it becomes a part of the vessel after welding; it includes
Connection thread for the Male Bearing
Edges for Welding
Connection points for the Drive Unit

Drive Unit:
The Drive Unit consists of the following parts
Connection Flange / Adapter to the Weld Plate
Driver Magnet
Geared Motor
TC Clamp for Weld Plate Assembly (up to Model BAGI 2K)