High Power Zigbee Rs-232 Adapter

We are engaged in manufacturing, exporting and supplying excellent quality High Power Zigbee RS-232 Adapter in Chungli, Taoyuan, Taiwan.
Model: ZA-H (2dBi Dipole Antenna)

Features:
1. 3 in 1 firmware: Coordinator, Router and end Device
2. TI CC2530 + 2591, High power mode
3. Support Serial Port, Digital I/O and Analog Input interfaces:
4 Digital I/O:
Remote control logic high (MIN 2.4V), low (MAX 0.5V).
Output drives capability 20mA. , Max Voltage 3.3V.
5. Analog Input(ADC): Max Voltage 3.3V, 8bit- resolution

Specifications:
1. Solution: TI CC 2530 + CC 2591 (High power)
2. Coverage: 300~500 m (High power) (The actual distance is depend on the real
environment and the antenna. For reference only)
3. Tx. Power: 18 dBm (High power)
4. Rx. Sensitivity (Nominal): -95 dBm (High power)
5. Baud Rate: Supports 1.2/2.4/4.8/9.6/19.2/38.4/57.6/115.2/230.4 Kbps
6. Connection: Point to Multi-points
7. UART Interface: TxD, RxD, GND, CTS/RTS
8. RS-232 Interface: D_SUB 9-pin female
9. Standard: 2.4 GHz IEEE 802.15.4 / ZigBee Pro Stack
10. Data rate: 250Kbps
11. Data Bit: 8 bit
12. Frequency: 2.4GHz~2.5 GHz
13. Modulation: DSSS
14. Antenna: SMA female + external dipole antenna
15. Antenna Impedance: 50 ohm
16. Power Supply: +5 to +6 V DC
17. Current Consumption: TX: 35.5 mA @ +4.5 dBm, RX: 24 mA
18. Operation Temperature: -20A C to +75A C
19. Dimensions: 88 mm (L) x 34 mm (W) x 15 mm (H) (BT-232B), Antenna: 11 cm
Remark: All contents are subject to change without notice.