Block Bonding Adhesive In Vijapur

MOQ500 Piece/Pieces

FeaturesSuperior bond strength easy to mix water resistant suitable for internal and external applications

Shelf Life12 months from date of manufacturing

MaterialOther

ColorOff-white to cream

HardnessHardens post-application provides rigid support

Adhesive TypeOther Polymer-modified powder adhesive

MOQ100 Bag/Bags

UsageInterior Exterior

Water Content26-28%

ColorOther Grey

Other NamesTile Adhesive

Ph LevelNeutral

ApplicationWall Floor

MOQ50 Bag/Bags

MaterialBOPP

UsageConstruction

GradeCLASSC1T

ApplicationMethod of Application1 Surface PreparationThe surface should be sound clean and free from dirt oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) conditionbefore application of adhesive | Substrates should be in plumb before application of adhesive2 MixingMix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniformlump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min.3 ApplicationApply Arrotile Adhesive paste on substrate with plain side of notch trowel.Press paste firmly to work into substrate.Comb with notch trowel with notched side notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Startplacing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive if not proper and if becomes non-sticky then scrap it & apply paste again...4 GROUTINGGrouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth5 CLEANINGClean the tools & equipments with potable water immediately after use.Precautions & LimitationsAlways add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C.Health & Safety PrecautionsProtective clothing such as gloves and goggles should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed..Shelf Life & StorageShelf life is 12 months from the date of manufacturing in unopened conditions.Store in a cool & dry place.

MaterialCement lime sand

Weight25 kg

PackagingPaper bag

ColorGreen

Shelf life12 months

Mixing ratioWater-to-powder ratio

Product TypeBlock Adhesive

ColorGrey

Packaging25kg bag

Adhesion StrengthHigh

Setting Time12-24 hours

Working Time30 minutes

MOQ50 Bag/Bags

ColorGrey

Other NamesSAHKAAR RAPID FIX

Physical StatePowder

AppearanceGrey

Water Required35%

Pot Life1.5-2 hrs

CuringNot required

Tensile Strength3.4 Mpa

Coverage200-225 sq ft

Adhesive TypePressure Sensitive

Packaging20kg & 50kg bags

ColorGrey

MaterialCement based

ApplicationAAC blocks

Shelf life12 months

Setting timeVariable

MOQ50 Bag/Bags

ColorGrey

Holding PowerHigh

Shelf Life12 Months

Glue thickness2-3 mm Recommended

MaterialOther

Packaging Size40 Kg

MOQ1000 Kilograms/Kilograms

HardnessSet hardness suitable for masonry applications

Glue thickness2-3 mm recommended

Surface Of ApplicationAAC blocks cement blocks fly ash bricks concrete blocks

Storage TemperatureStore in a cool dry place below 30C

Shelf Life12 months from the date of manufacture (sealed pack)

Tensile Strength10 N/mm2

MOQ1 Bag/Bags

ColorGrey

Physical StatePowder

MOQ1 Bag/Bags

Surface Of ApplicationBlocks Bricks

Holding PowerLong Lasting

Shelf Life12 months

Adhesive TypeOther Polymer Block

MaterialOther Polymer Based

FeaturesHigh Strength Waterproof Crack Resistant

Adhesive TypeSolvent Adhesive

UsageFootwear Construction

GradeConstruction

Purity>99%

ApplicationWood Glass Rubber Leather

Physical StateLiquid

MaterialPolymer

ColorWhite

ContainerPlastic bucket

Weight1kg

Shelf Life2 years

ViscosityMedium