Block Bonding Adhesive In Surat

MOQ10 Box/Boxes

Adhesive TypeRubber

UsageLeather

MOQ10 Kilograms/Kilograms

ColorGrey

ApplicationLaying and jointing of fly ash bricks cement blocks hollow blocks AAC blocks etc. Jointing of pre-stressed concrete slabs panels. Parapet walls jointing of cement window and door frames garden and boundary walls.

Physical StateLiquid

Application temperature10-30°C

ColorGray

FeaturesStrong bond Weatherproof Easy application Fast setting Durable Cost effective

MaterialPolymer

PackagingCartridge

Setting time30-60 minutes

ApplicationAAC blocks

ColorGrey

Coverage11.15 sq m

FeaturesHigh strength Easy application Cost effective Fast setting Thin joint Durable bond Pre-mixed Water resistant

Joint thickness3-5 mm

MaterialCement sand admixtures

MOQ100 Piece/Pieces

Adhesive TypePressure Sensitive

Colorblue

Shelf Life12 Months

Featuresgood quality

Gradea

Purity99%

Ash Content1% max

Cold water soluble55-80%

ColorWhite

FeaturesStrong bonding Cold water soluble Automatic plant use High efficiency Various grades Easy to use Cost effective

Moisture Content10% max

Particle Size80% pass through 80%

MOQ10 Bag/Bags

UsageConstruction

Grade53 Grade

ApplicationConstructions

ColorWhite

Physical StatePowder

MOQ100 Bag/Bags

ColorOther Grey

Other NamesTile Adhesive

Ph LevelNeutral

UsageInterior Exterior

Water Content26-28%

ApplicationWall Floor

MOQ50 Bag/Bags

MaterialBOPP

UsageConstruction

GradeCLASSC1T

ApplicationMethod of Application1 Surface PreparationThe surface should be sound clean and free from dirt oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) conditionbefore application of adhesive | Substrates should be in plumb before application of adhesive2 MixingMix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniformlump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min.3 ApplicationApply Arrotile Adhesive paste on substrate with plain side of notch trowel.Press paste firmly to work into substrate.Comb with notch trowel with notched side notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Startplacing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive if not proper and if becomes non-sticky then scrap it & apply paste again...4 GROUTINGGrouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth5 CLEANINGClean the tools & equipments with potable water immediately after use.Precautions & LimitationsAlways add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C.Health & Safety PrecautionsProtective clothing such as gloves and goggles should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed..Shelf Life & StorageShelf life is 12 months from the date of manufacturing in unopened conditions.Store in a cool & dry place.

MOQ110 Bag/Bags

ColorGrey

Storage Temperature25 Celsius (oC)

Adhesive TypeWater Activated

Tensile Strength5.2 Newtons per Millimetre Squared (N/mm2)

Glue thickness3 Millimeter (mm)

Other NamesBlock Bonding Adhesive

MOQAny Order Pack/Packs

Size40 Kg

StorageDry Place

UsageConstruction

Physical FormPowder

Purity(%)99

GradeChemical Grade

MOQ5 Piece/Pieces

GradeIndustrial Grade

PurityHigh

Physical StateOther Paste

Bond StrengthLow

Dominant ColorRed

Drying Time30 mins

FeaturesStrong Bond Cost-effective Multi-purpose Easy Application

MaterialRubber based

Net Weight100g

Application methodNeedle applicator

Bottle size20 ml

ColorWhite

FeaturesStrong bonding Quick setting Versatile use Durable bond Easy application

MaterialCyanoacrylate

Setting time30 sec

MOQ10 Unit/Units

ApplicationBuilding Construction etc

Product TypeBond Adhesive

Weight1 Kilograms (kg)

UsageWaterproofing and Repairing Work

FeatureHigh Qulaity