Block Bonding Adhesive

MOQ500 Piece/Pieces

Tensile StrengthExcellent, suitable for high-strength bonds

FeaturesSuperior bond strength, easy to mix, water resistant, suitable for internal and external applications

HardnessHardens post-application, provides rigid support

Surface Of ApplicationCement screed, concrete, brickwork, masonry

ColorOff-white to cream

Holding PowerLong-lasting, durable bond

MOQ100 Bag/Bags

ApplicationWall, Floor

Ph LevelNeutral

Other NamesTile Adhesive

UsageInterior, Exterior

Water Content26-28%

ColorOther, Grey

MOQ10 Bag/Bags

Other NamesAAC Block Adhesive

UsageConstruction

GradeChemical Grade

Purity95% - 99%

ColorWhite

Physical StatePowder

MOQ50 Bag/Bags

ColorGrey

GradeIndustrial

Purity99%

ApplicationConstruction

Physical StatePowder

MOQ50 Bag/Bags

Shelf Life12 Months

Tensile StrengthAbove 10 kg/cm2

FeaturesReady to use, High coverage, High tensile strength

Packaging Size40 Kg

FormPowder

Adhesive TypeOther, Cementitious

MOQ10 Ton/Tons

FeaturesGood Quality

Shelf Life1 Years

HardnessYes

Surface Of ApplicationSmooth

FormPowder

UsageConstruction

MOQ100 Bag/Bags

Usage & ApplicationsSmart Bond

Weight50 Kilograms (kg)

Installation TypeAdhesive

Product TypeOther, AAC Block Adhesive

Size50kg

Thickness25mm Millimeter (mm)

Other NamesBonding Adhesive

Physical StateLiquid

MOQ100 Kilograms/Kilograms

FeaturesHigh quality

Storage Temperature85-90 Celsius (oC)

FormLiquid

Packaging Size1kg+800g and 5kg+4kg

GradeIndustrial grade

Purity100 %

MOQ50 Bag/Bags

MaterialBOPP

UsageConstruction

GradeCLASSC1T

ApplicationMethod of Application1 Surface PreparationThe surface should be sound, clean, and free from dirt, oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) conditionbefore application of adhesive | Substrates should be in plumb before application of adhesive2 MixingMix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniformlump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min.3 ApplicationApply Arrotile Adhesive paste on substrate with plain side of notch trowel.Press paste firmly to work into substrate.Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Startplacing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again...4 GROUTINGGrouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth5 CLEANINGClean the tools & equipments with potable water immediately after use.Precautions & LimitationsAlways add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C.Health & Safety PrecautionsProtective clothing, such as gloves and goggles, should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed..Shelf Life & StorageShelf life is 12 months from the date of manufacturing in unopened conditions.Store in a cool & dry place.

MOQ10 Piece/Pieces

MaterialOther, Epoxy Resin based

Storage TemperatureBelow 30C

HardnessHigh (After Curing)

Adhesive TypeOther, Two Component (Resin & Hardener)

Types Of ChemicalEpoxy Compound

Surface Of ApplicationMultipurpose (suitable for multiple surfaces)

MOQ50 Bag/Bags

Surface Of ApplicationConcrete Blocks

ColorWhite

FeaturesHigh quality

UsageConstruction

GradeIndustrial grade

Physical StatePowder

MOQ1000 Kilograms/Kilograms

FormPowder

Glue thickness2-3 mm recommended

Tensile Strength10 N/mm2

MaterialOther, Cementitious polymer-based adhesive

Adhesive TypeOther, Premixed, ready-to-use dry adhesive

FeaturesFast setting, high bonding strength, water resistant, easy application, reduces construction time

MOQ10000 Kilograms/Kilograms

Chemical NameBlend of Cement, Graded Sand, and Special Polymers

SmellOther, Odorless

UsageMix with water and apply for masonry work

Water Content< 1%

Physical FormPowder

HS Code32149000

MOQ100 Box/Boxes

ColorWhite & Red

Product TypeShoes Material

MaterialOther, Adhesive

TechniqueQuick Dry

MOQ100 Liter/Liters

Packaging Size1 ltr

Shelf Life1 Years

FormLiquid

FeaturesGood Quality

Other NamesParker Lord - Chemlok TS1677-13 HS

UsageOther