Block Bonding Adhesive

MOQ100 Bag/Bags

Weight50 Kilograms (kg)

Usage & ApplicationsSmart Bond

Installation TypeAdhesive

Product TypeOther, AAC Block Adhesive

Size50kg

Thickness25mm Millimeter (mm)

MOQ100 Bag/Bags

Other NamesTile Adhesive

ColorOther, Grey

ApplicationWall, Floor

Ph LevelNeutral

UsageInterior, Exterior

Water Content26-28%

MOQ10 Bag/Bags

Other NamesAAC Block Adhesive

UsageConstruction

GradeChemical Grade

Purity95% - 99%

ColorWhite

Physical StatePowder

MOQ10 Bag/Bags

GradeIndustrial

Purity99%

ApplicationConstruction

ColorGrey

Physical StatePowder

MOQ100 Pack/Packs

Packaging Size40 Kg

Adhesive TypeOther, Cementitious

FeaturesReady to use, High coverage, High tensile strength

MaterialOther

Tensile StrengthAbove 10 kg/cm2

HardnessSufficient for block work

MOQ1 Bag/Bags

ColorGrey

Physical StatePowder

MOQ10 Ton/Tons

HardnessYes

FeaturesGood Quality

FormPowder

Surface Of ApplicationSmooth

Shelf Life1 Years

UsageConstruction

Other NamesBonding Adhesive

Physical StateLiquid

MOQ50 Bag/Bags

MaterialBOPP

UsageConstruction

GradeCLASSC1T

ApplicationMethod of Application1 Surface PreparationThe surface should be sound, clean, and free from dirt, oil or grease before Arrotile Adhesive is applied | Substrate should be in Saturated Surface Dry (SSD) conditionbefore application of adhesive | Substrates should be in plumb before application of adhesive2 MixingMix 20 kg of Arrotile Adhesive with 5 to 6 liters of water | Mix to a uniformlump-free consistency using a forced action mixer | Keep it for approximately 5 minutes to fatten it | Hand mixing is recommended for small quantities only | Mix as much quantity as can be consumed in 25 min.3 ApplicationApply Arrotile Adhesive paste on substrate with plain side of notch trowel.Press paste firmly to work into substrate.Comb with notch trowel with notched side, notch trowel to be selected as per required bed thickness | Spread as much adhesive paste as can be tiled within 15 minutes | Startplacing/fixing of tiles & tap using beating block or rubber mallet | For large format tiles & stone provide back butter for 100% coverage & firm bonding | Periodically remove a tile to check transfer of material on tile. Also check spread of adhesive, if not proper and if becomes non-sticky then scrap it & apply paste again...4 GROUTINGGrouting should preferably be carried out at least 24 hours after the completion of tiling. For grout joints upto 3mm wide use Arrotile Tile Grout & Epoxy Grout | For grout joints above 3mm wide use RTM Wide | After grouting clean and polish tiles with a damp sponge or cloth5 CLEANINGClean the tools & equipments with potable water immediately after use.Precautions & LimitationsAlways add powder to liquid and not liquid to powder While working in temperature more than 35 C (95 F) always dampen the substrate & finish faster Tiling should not be done when surface temperature is below 40 C.Health & Safety PrecautionsProtective clothing, such as gloves and goggles, should be worn. Treat any contact to the skin eyes with fresh water immediately. Do not induce vomiting & seek medical Assistance immediately Reseal pack after use and ensure product is stored as instructed..Shelf Life & StorageShelf life is 12 months from the date of manufacturing in unopened conditions.Store in a cool & dry place.

MOQ10 Piece/Pieces

Glue thicknessThin Layer Application

Adhesive TypeOther, Two Component (Resin & Hardener)

FeaturesFast Setting, Transparent Finish, Water & Heat Resistant, Non-corrosive, Multipurpose

Storage TemperatureBelow 30C

Shelf Life12 months

Surface Of ApplicationMultipurpose (suitable for multiple surfaces)

MOQ100 Piece/Pieces

Packaging Size40 kg

FeaturesEasy to use

MaterialOther

UsageConstruction, Other

GradeIndustrial Grade

MOQ1000 Kilograms/Kilograms

Adhesive TypeOther, Premixed, ready-to-use dry adhesive

Surface Of ApplicationAAC blocks, cement blocks, fly ash bricks, concrete blocks

Shelf Life12 months from the date of manufacture (sealed pack)

Types Of ChemicalPolymer modified cementitious adhesive

Glue thickness2-3 mm recommended

MaterialOther, Cementitious polymer-based adhesive

MOQ10 Piece/Pieces

FeaturesExcellent adhesion, Water resistant, Non-slump, Easy to mix & use, Suitable for vertical surfaces

Packaging Size20 Kg, 25 Kg bags

Adhesive TypeOther

Glue thickness3-6 mm recommended for installation Millimeter (mm)

FormFree flowing powder

Storage TemperatureStore below 30C in a dry place Celsius (oC)

MOQ10000 Kilograms/Kilograms

Ph Level11aEUR"13 (alkaline)

ColorOther, Grey

Other NamesBlock Fixing Mortar, Block Jointing Adhesive

ApplicationFor joining AAC, CLC, and Fly Ash blocks

HS Code32149000

AppearanceGrey Fine Powder

MOQ100 Box/Boxes

ColorWhite & Red

Product TypeShoes Material

MaterialOther, Adhesive

TechniqueQuick Dry

MOQ100 Liter/Liters

Packaging Size1 ltr

FeaturesGood Quality

FormLiquid

Shelf Life1 Years

Other NamesParker Lord Chemlok 202 AB Adhesive -Rubber to Metal Bonding System

UsageOther