Wall Grooving Machine

Traditionally, grooving in brick needs a hammer or chisel. But they can only cut 30 meters which equals to 100 feet in a day (determined by the rigidity of the wall).

So, if you choose our Wall Grooving Machine (Wall Chaser) , you can save the expense & time from wall grooving. The Wall chasing machine is the only one which can be used to cut any line on the brick wall.
Its special Advantages are as follows.

1. It will not damage the wall material and leave perfect slot after cutting which avoid the damage traces caused by a hammer or chisel. In addition, it is unnecessary for users to remove the traces left in the slot
by a diamond disc cutting machine. Every cutting will leave a deep and wide groove.
2. The grooving machine can cut straight or curved groove with no traces left in sideline corner and it also supports cutting from any directions or even round cutting.
3. It can be horizontally hung on the wall without sustaining by the hands which enables it to stick to the wall when the power is cut off or the operatorsa hands get away.
4. What follows is the longevity of the blade using in different materials:
Standard hollow sand brick about 6000 meters , Cement sand brick about 3500 meters
Cement-covered brick wall about 3000 meter
a c Power Source:- Electricity
a c Rated Voltages:- 230V -240V (AC)
a c Frequency:- 50 Hz
a c Input Power:- 1450W
a c No-Load Speed:- 1800r/min.
a c Grooving Width:- A(15-25mm), B (25-35mm)