Thermal Dispersion Flow Switch - 316 Ss, Polysulfone, Fkm | 0.5-10 Ft/s Setpoint Range, 0.07 Ft/s Repeatability, Nema 4x Enclosure Rating, Led Status Indicators

Over the period of time, we are affianced in supplying and manufacturing
of Thermal Dispersion Flow Switch in Bengaluru, Karnataka, India. The SERIES TDFS Thermal Flow Switch uses impulse thermal dispersion measurement technique to indicate whether the flow rate is above or below a user set flow rate.

Product Details:
Brand : Dwyer
Wetted Materials : 316 SS, Polysulfone, and FKM.
Setpoint Range : 0.5 to 10 ft/s (0.15 to 3.0 m/s).
Repeatability : 0.07 ft/s +3% of setpoint.
Typical Deadband : 0.1 ft/s +15% of setpoint.
Pressure Limits : 300 psig (20.67 bar).
Response Time : 8 S.
Power Consumption : 9 to 24 VDC.
Current Consumption Average : 93 mA, Peak 300 mA.
Process Connection : 1/2" NPT male.
Enclosure Rating : NEMA 4X (IP65).
Switch Type : 1 NO NPN, 1 NC NPN.


Features:
Better long term reliability and life expectancy than mechanical flow switches with no paddles or vanes to wear or break, no jams in the paddle movement, and no seals on movement assembly to wear or leak
Not affected by empty pipe detection and avoids overheating by actively heating above the process temperature and then cooling down to process temperature
Set point is easily field set by taping the included magnet on the set point target three times at the desired flow rate
LED status indicators provide visual switch indication of set point
Low pressure drop, only needs to be 10% into the flow (e.g. 1/8" for 3/4" schedule 40 pipe)