Grey Black Ordinary Low Temperature Catalyst

We offer a high quality Ordinary Low Temperature Catalyst which is a super-weathering resistant resin that can improve the adhesive force of coating film. It also strengthens the rate of reaction and thoroughly eliminate the disadvantages caused by long curing time of powder. Based on industry quality standards, these chemical compounds are assured of precise composition and effective functioning.  I. General The ordinary low-temperature catalyst is a synthetic catalyst with the self-crosslinked super-weathering resistant resin as a carrier, which can obviously improve the adhesive force of coating film, strengthen the rate of reaction and thoroughly eliminate the disadvantages caused by long curing time of powder.   II. Technical indexes Appearance: milk-white resinoid Vitrification point:                                                        70 centidegree Active ingredient:                                                        99.5%   III. Application and performance 1. Be applicable to pure epoxy, epoxide-polyester, TGIC, HAA or other powder coatings. 2. Enjoy excellent leveling and good peeling effect on transfer powder coating. 3. For indoor matte powder coating, avoid the occurrence of gloss instability due to different baking temperature and coating thickness, and enjoys good adhesion for yellow and black polyesters and good storageability. 4. For zinc plating, electrophoresis paint and iron casting, enjoy long and good adhesion and high efficiency reaction and reduce the reaction temperature. 5. Applicable indoor baking temperature: 150 centidegree/15~20min, 170 centidegree/10~15min, 200 centidegree/3~5min.   IV.Attention: The trial should be carried out before mass production. After inspection and confirmation, the production will be started. Please firmly seal the product and keep it away from fire. Store in shady and dry place. The product doesnot contain heavy metals in compliance with European ROHS standards.