Wall Vitrified Tiles at Best Price in Himatnagar, Gujarat

Wall Vitrified Tiles

Price:

Get Latest Price

In Stock

Product Specifications

Color	Blue
Dimensions	Variable
Features	Durable, Stylish, Versatile, Easy Install, High Quality, Affordable, Water Resistant
Finish	Glossy
Hardness	7 Mohs
Material	Vitrified Ceramic
Thickness	Variable
Water Absorption	<0.5%

Product Overview

Key Features

Wall Vitrified Tiles

We are fabricating a wide range of the Wall Vitrified Tiles that are available in the different sizes, shades, design, colors, thickness, weight and finishes as per applications.



It is used in -

-	Satellite	-	Cup-saucers


-	Vehicle-set	-	Bon-china


-	Tiles	-	Medical equipments


-	Electricity	-	Rifle making industry


-	Sanitary ware

Technical
Specification for Vitrified Tiles

Technical Parameters	ASTM	CEN	ISO	INT. STD	City Vitrified
Deviation in length / width	C 499	EN 98	10545-2	0.5%	0.05%
Deviation in thickness	C 499	EN 98	10545-2	5.0%	3%
Straightness of side	-	EN 98	10545-2	0.5%	0.1%
Rectangularity	-	EN 98	10545-2	0.6%	0.2%
Surface flatness	C 485	EN 98	10545-2	0.5%	0.2%
Water absorption	C 373	EN 99	10545-3	0.5%	0.04%
Scratch hardness (Moh's)	C 849	EN 101	-	6	7
Modulus of Rupture (N/mm²)	C 648	EN 100	10545-4	27	45
Breaking strength (N)	C 648	-	-	1113 N	> 2800 N
Skid resistance	C 1028	-	DIN 51130	> 0.4	> 0.4
Abrasion resistance (mm³)	-	EN 102	10545-6	205	< 144
Linear thermal expansion(/C)	C 372	EN 103	10545-8	6.4 x 10^-6	6.4 x 10^-6
Thermal shock resistance	C 484	EN 104	10545-9	No Damage	No Damage
Colour resistance to light	DIN 51094	-	10545-16	No Change	No Change
Glossiness	-	-	-	-	70 - 85
Chemical resistance (Except HF)	C 650	EN 106	10545-13	No Damage	No Damage
Density (gm/cc)			DIN 51082		2.4
Frost Resistance	-	-	10545-12	Frost Proof	Frost Proof
Decorative Faults	-	-	10545-2	Defect Free	Defect Free
Surface Quality	-	-	10545-2	95% Defect Free	> 95%
Impact Resistance	-	-	-	Good	Good
Crazing Resistance	-	-	10545-11	No Crazing	No Crazing
Resistance to house hold chemicals	-	-	10545-13	No Visible Effect	No Visible Effect

Technical
Specification for Floor Tiles

	Characteristics	IS : 13755 Requirements Gen Specification Enitiblla	City Norms
	DIMENSIONS & SURFACE QUALITY
A)	Deviation in length	0.5%	0.3%
B)	Deviation in thickness	0.5%	0.5%
C)	Squareness	0.5%	0.3%
D)	Straightness of side	0.5%	0.3%
E)	Surface flatness	0.5%	0.3%
F)	Surface quality	Min. 95% of tiles should be free from defect	> 95%
G)	Deviation in width	0.5%	0.3%
	PHYSICAL PROPERTIES
A)	% Water Absorption	C 372	Below < 4%
B)	Modulus of Rupture / Bending Strength	C 484	300 kg / cm²
C)	Scratch Resistance (Moh's Scale)	DIN 51094	Min. 5
D)	Resistance of surface Abrasion	-	Depend on Series
E)	Crazing Resistance	C 650	Min 5 Cycle

Please read the following Instructions before Laying the Tiles

1.	Variation in shade, colour & pattern is natural features of ceramics, therefore we advised you to purchase sufficient tiles at one time to complete the job.

2.	First of all, before opening the boxes of tiles, please check manufacturing date, design name, colour tone and batch. We advise use the material having same batch and same date in a single room.

3.	Please check the level of prepared bed.

4.	Slope should be given on the surface on which tiles are to be fixed for water preparing flow at the time of mortar bed, The mortar bed or surface on which tiles are to be fixed should be fine, smooth, dirt free & dust free to avoid contamination.

5.	Ceramic / Vitrified tiles have inherent property of colour variation. So before laying please follow the instruction as below.
	a.	First of all, lay the tiles in room without applying cement mortar and observe the tiles for colour tone & if some tiles does not match with others for colour or size, Please lay all tiles in such a way that arrow behind the tiles or symbol of tiles should remain in one direction in whole room.
	b.	Please lay all the tiles in such a way that "arrow behind the tiles" or "symbol of tiles" should remain in one direction in whole room.
	c.	Before laying the Stonela Series Tiles please Check that back side of the tiles symbol be in a same direction.
	d.	To add beauty on the laid surface, a gap of 3 to 4 mm spacers can be kept between two tiles.
	e.	Please fillup the joints between 2 tiles after 24 hours of laying
	f.	After finishing the joint filling wipe out of excess grout with a damp sponge and polish the tiles with a soft wand dry cloth for a clean surface. The tiles can also be clean by mild acid.


6.	Allow 3 to 4 days for bed drying

7.	Before doing cement or furniture work on laid tiles, we advise to use plain plastic(without printed) with POP coating on it

8.	We appreciate your suggestions & views regarding the design, shade & colour of tiles

9.	Good suggestion & customer satisfaction will helpful to use making your home flooring a thing of beauty & pride.

10.	Company cannot entertain any complain afte4r laying the tiles.