Two Component Waterproof Coating

Two
Component Waterproof Coating

With rich experience in this domain, we
are providing Two Component Waterproof
Coating services. We provide these coating services according as per the demand of
clients in compliance with the industrial standard. Two Component
Waterproof Coating services are highly used in water
tanks, terraces, swimming pools, bathrooms and other areas. We also check these
coating on various norms such as chemical resistance, weathering
resistance and crack bridging property. Moreover, we are committed to provide
these coating services to our clients within stipulated time period.

Further details:

Description

SAVE- IT 204 is a two component acrylic modified cementitious coating that requires only on site mixing to form the ideal product to waterproof and resurface concrete, masonry, and most other construction materials. Simply applied by stiff brush, roller, or trowel, it forms a waterproof, flexible coating. SAVE- IT 204 provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SAVE-IT 204 provides a hardwearing, seamless, waterproof membrane for roofs and foundation protection.

Primary uses

A a A A. To reface and even out variations in concrete surfaces.

A a A A. As a waterproof lining for water retaining structures.

A a A A. Sealing and coating tie bar holes to ensure water tightness.

A a A A. To provide foundation protection.

A a A A. As a waterproof coating for roofs.

A a A A. As a backing to marble and granite to prevent water ingress and thus alleviate surface staining.

A a A A. To provide protection to concrete surfaces from carbonation and chloride attack. Advantages

A a A A. A 1mm coating provides anti carbonation cover equivalent to over 80cm of concrete.

A a A A. Waterproof-resists up to 7 Bars (70 meter head) of pressure.

A a A A. Excellent adhesion. Bonds to porous and non-porous surfaces.

A a A A. Non toxic suitable for contact with potable water.

A a A A. Suitable for light pedestrian traffic.

A a A A. Breathable - whilst repelling water, allow substrate to breathe.

A a A A. High resistance to carbon dioxide and chloride ion.

A a A A. Unlike conventional coatings which require a 7-28 day cure of concrete, SAVE- IT 204 can be applied to 24 hour-old concrete thereby giving immediate protection.

Standards

BS 1881 Part 5 1983 - I.S.A.T.

DIN 1048 Water Penetration Test

Water Research Council - "Suitable for use in contact with Potable Water".

Technical Data/Typical properties

Density: 1800kg/mA a A A

Water penetration (DIN 1048): 7 bars - no leakage (2mm dft) % elongation: >5% (unbounded)

Direction for use

Surface preparation

As with all coating systems, surface preparation is of prime importance. Remove all grease, oil, dust, residual curing compound, mould release agent or other contaminant that could impair adhesion. Laitance should preferably be removed by light sweep blasting or hydro jetting. Mechanical wire brushing may be appropriate for small areas.

Mixing

SAVE- IT 204 is supplied in pre-measured units and should be mixed on site utilising clean containers. Slowly add the powder to the liquid and mix, using a slow speed drill fitted with a suitable paddle.

MIX AND USE. Do not mix more material than can be used in one hour.

Application: Do not apply to dry concrete

Saturate concrete surfaces with clean water whilst still visibly damp, but free of standing water, apply, using a short, stiff bristle brush or roller. Trowel application can be undertaken as necessary. For heavy 6-10mm depressions, honeycombs etc. use less gauging liquid and mix to the desired consistency. Where more than one coat is found necessary to achieve the desired thickness, apply the second or subsequent coats after the previous coat has dried. It is recommended, for general resurfacing, that each coat should be a minimum of 1mm thick.

Packaging

SAVE- IT 204 is supplied in 2 components as below:

Powder (White/Grey colour) - 20 kg bag

Liquid A AcAca A Aca A 10 Kg can

Mixing ratio, liquid to powder, 1:2 by weight