Submerged Scraper Conveyor By Macawber Beekay Pvt. Ltd.

Salient Features of Submerged Scraper Conveyor :-
1. The head shaft/sprockets/bearings assembly is such that it can be removed as a single assembly and replaced in a very short period.
2. The sprockets are designed with replaceable teeth. These teeth can be replaced without dismantling any part of the conveyor.
3. Sprocket teeth are of special alloy steel duly heat treated to minimise wear and tear.
4. Head shaft bearings are located outside the conveyor assembly in completely sealed bearing blocks thereby ensuring that no ash ever enters and damage the same.
5. Speed of conveyor chain varies in the range of 0.5 to 2 meters per minute depending upon capacity required, to minimise the wear and tear of all the moving parts.
6. Specially designed Alloy Steel Chains have been developed to counter erosion and corrosion which in turn substantially increase the life of chain.
7. Gates are provided on the sides of the conveyor. By opening gates on one side, the conveyor can easily be removed to the other side in a very short span of time.
8. The return path of the conveyor is fully covered to prevent any spillage of ash on the floor.
9. Liners strips are provided on the return path to prevent any wear and tear of the body of the conveyor.
10. Tail guide assemblies are independent for both the chains. Due to this feature independent adjustments can be made because the wear and tear in the chains is always slightly uneven in both the chains.