Post Forming Glue at Best Price in New Delhi, Delhi

Post Forming Glue

Price:

Get Latest Price

In Stock

Product Specifications

Actives	51%
Bond strength	>295 Kg
Density	1.1
Features	Strong bonding, Water resistant, Heat resistant, Rapid setting, Efficient adhesion
Open time	5-10 minutes
PH value	5.5
Solid contents	54%
Viscosity	10000 CPS

Product Overview

Key Features

We hold years of expertise in the business of supplying quality assured Post Forming Glue. These adhesives are tested thoroughly at our in-house built testing units so that only quality products are delivered to clients. The offered product is supplied in fine packaging to avoid any kind of damage during the course of delivery. In addition, we ensure timely delivery of bulk quantities of Post Forming Glue across different parts of the world.

Features:

Efficient adhesion
Water resistant
Resistant to heat

Technical details

Characteristics:

YUG COL-ULTRA is aquatic polyvinyl acetate dispersion with cross linking properties and stabilization with polyvinyl spirits.

Specifications:

These technical specifications are laid down for each lot before its release by our quality control

Presents in YUG COL-ULTRA

Solid contents	54%A A 1
Actives	51%A A 1
PH value	5.5A A 0.5
Density	1.1A A 0.02 10000A A 10% CPS
Viscosity : LVT spindles no. 4/12 RPM)at 30A A c	10000A A 10% CPS
Open time (At room temperature & 200 micron film thickness)	5 to 10 minutes
Bond strength (bonding strength with load more then 295 Kg)	Beyond this wood breaks but bond doesn't break
Rapid setting (Bonding)	30 minutes A A 5' for 40% strength 2 hours A A 10' for 60% strength 3 hours A A 10' for 80% strength 6 hours A A 15' for 90% strength 24 hours A A 30' for 100% strength
Water resistant	Keeping joint in cold water (or room temp) for 6 to 12 hrs,take out and dry again, the joint strength will remain almost same. Keeping joint in hot water (temp up to 80A A c) for 1 to 2 hrs,take out and dry again, the joint strength will remain almost same.
Coating weight and film thickness	120gm to 180 gm per mA A
Dispersion particles size	2A Aum app.
Min film forming temperature	App. 4A A c
Film appearance	Slightly opaque
Shelf life	Best use before 6 months

Applications

YUG COL- ULTRA is qualified for water resistant and heat resistant wood glue. The dispersion exhibits a rapid increase in bond strength when pressed at temperature higher then 20A A c.
YUG COL- ULTRA on hot press application shows accelerated increase of bond strength, making it most suitable for the short contact lamination of panels with laminate sheet finishing and for best forming finishes of panel edges and profiles.
YUG COL- ULTRA also gives excellent bonding strength to wood joining .It's bonds exhibits and outstanding heat and water resistant.

Preservation and storage
YUG COL- ULTRA contains some initial preservatives and sufficiently protected against micro organism during further storage. It should be stored for no longer then 6 months at temperature as 5A A Aca A A a A A to 45A A Aca A A a A A c and must be protected from direct exposure to sunlight and frost. It should been sured that at open drums should always be tightly closed.

Technical data ascertained by our laboratory at the time of product may vary with storage time and conditions and may deviate from stated limits, especially after longer storage time, increase in viscosity may be observed

Safety and environment protection
YUG COL- ULTRA isn't a hazardous substance or preparation with in the meaning of the current hazardous material regulations.

Note: This information is based on our present state of knowledge and is indented to provide general notes on our product and their usage, which we believe but no guaranty and no warranty of any kind is made with respect there to.