Polymer Bonding Agent - Modified Acrylic Copolymer, Milky White Liquid Emulsion, - Excellent Adhesion, Durable Waterproofing, Corrosion Resistant

Usage
Surface preparation of the substrate is vital for the effective adhesion and bonding of KR Polybond So, the surface should be free of laitance and loose dust particles, oil, grease and other loose dirt. The surface should be wire brushed and broomed before application. The performance of KR Polybond whether patches, renders, screeds, toppings or slurry only, is dependent on the substrate preparation. Depending upon the structural condition, preparation should be done. The basic idea is that the substrate should be clean, sound and free from any deleterious material. The unevenness of the surface should be leveled. The corroded reinforcement should also be made clean and all loose particles should be removed.

For better effect, prepare the slurry coat of cement- KR Polybond mixing them at a ratio 2:1. The slurry has to be applied on the repaired surface with a soft 4-inch plastic thistle brush in one direction. Allow this first coat to air dry for about 15-20 minutes then one can put the concrete for bonding purpose. Effectiveness of KR Polybond In case of improper waterproofing at a particular spot, a touch up coat of the KR Polybond and Cement mixture should be applied over the particular area and must be allowed to cure.

For other repair applications, please refer to Repair System guideline. KRWP technical service team is also available to train your personnel and supervise the initial operation at your construction site.

PACKAGING: 50 / 100 kg HDPE. Containers.

SHELF LIFE: 12 months in un opened container.

STORAGE: Keep away from direct sunlight and extreme heat.

COVERAGE: 1 Kg of KR Polybond approximately gives average coverage of ~30 -35 square feet as a slurry coating after mixing with cement.

TECHNICAL SERVICE:
KRWP has established itself in various fields on the basis of its dependable technical service. For this purpose, we maintain a well-equipped laboratory for research & quality assurance of all products. Our experienced personnel are always on call and would always be available for product demonstrations and product performance monitoring.

SAFETY PRECAUTIONS:
KR Polybond is non toxic and non-flammable. However, any splashes on the human body must be washed with plenty of water.