Piano Type Dip Switch

Mechanical Specification:
1. Operation Force: 800g Max
2. Stroke: 2.00mm
4. Storage Temp: -40degree to 85degree

Materials-
Base: Engineering Plastics,black.
Cover: Engineering Plastics,red or Blue.
Button: Engineering Plastics,white.
Terminal: Alloy Copper,gold Plating.

Electrical
1. Electrical Life: 2000 Operations Cycles Per Switch.
2. Non-switching Rating: 100ma,50vdc
3. Switching Rating: 25ma,24vdc
4. Contact Resistance: 50m Max,at Initial;100m Max,after Life Test.
6. Dielectric Strength: 500vcd/1 Minute
7. Capacitance: 5pf Max.
8. Circuit:single Pole Single Throw.

Soldering and Cleaning Processes-
1.keep All Switch Contacts in Their "Off" Position for All Operation .
2.wave Soldering: Recommended Solder Temperature at 260degree Max.5 Seconds .
3.hand Soldering: Use a Soldering Iron of 30 Watts, Controlled at 320degree Approximately 2 Seconds, while Solder.
4.cleaning Process: Flux Clean Using Force Rinse,high Agitation or Triple Bath Cleaning Method.
Freon Tf or Te Give Excellent Results. When Vapor Methods Are Used Do Not Subject the Switch to Solvents at Temperature Above 51degree.

Packing-
All Dip Switches Are Packed in Standard Ic Tube.
Smt Type Can Be Packed in Tape or Reel Packing